Schematic_SHW_-_Standard_Layout  Flat_Plate_FINO_Brochure_1 Flat_Plate_FKF_ON_ROOF_Instructions This On Roof Flat Plate Professional Solar Thermal Installation Kit is perfect for homeowners who want to harness the power of the sun to heat their water. The kit includes a flat plate panel, two roof integrating fastening bracket sets, a wooden stop lath, and an in-roof flashing metal set. Also included are a 3/4 inch connection set, an air eliminator with an extension and blanking cap, and three wood screws for easy installation. The Sorel MTDCV5 controller and pump station (to be selected) help regulate the system, and the Twinsol pipework (length to be selected) helps deliver hot water to where it is needed. Antifreeze (5 litres), a discharge vessel, an expansion vessel (18 litres), a Spirovent de-aerator, and an overvoltage protection unit are included for optimal performance and safety. The kit also includes a bracket for the expansion vessel, a connection pipe for the expansion vessel, two DN16 joiners, three PT1000 sensors, six DN16/22mm adapters, and 12 DN16 back nuts. This kit is designed for easy installation and provides everything needed for a complete solar thermal system. With the power of the sun, homeowners can enjoy hot water while reducing their carbon footprint and lowering their energy bills. 1x Flate Plate Panel (Select Orientation) 2x Roof Integrating Fastening Bracket Sets (of 3) 1x Wooden Stop Lath 1x In Roof Flashing Metal Set 1x 3/4inch Connection Set 1x Air Eliminator with Extension & Blanking Cap 3x Wood Screws 1x Sorel MTDCV5 Controller 1x Pumpstation (please select) 1x Twinsol Pipework (please select length) 1x Antifreeze 5litres 1x Discharge Vessel 1x Expansion Vessel 18litres 1x Spirovent De-aerator 1x Overvoltage Protection Unit 1x Bracket for Expansion Vessel 1x Connection Pipe for Expansion Vessel 2x DN16 Joiners 3x PT1000 Sensors 6x DN16/22mm Adapters 12x DN16 Back Nuts On Roof Flat Plate Professional Solar Thermal Installation Kit

Read more less

Schematic_SHW_-_Standard_Layout  Flat_Plate_FINO_Brochure_1 Flat_Plate_FKF_ON_ROOF_Instructions The On Roof Flat Plate Professional Solar Thermal Installation Kit is perfect for those looking to install a flat plate solar thermal system on their roof. This kit includes a Flate Plate Panel of your choice of orientation, 4 roof brackets, and various profile rail and stop sets for secure mounting. Additionally, a 22mm connection set and air eliminator with blanking cap are included for easy integration into your existing plumbing system. The kit also features a Sorel MTDCV5 Controller, pump station (please select), Twinsol pipework (please select length), antifreeze, discharge vessel, expansion vessel, Spirovent de-aerator, and overvoltage protection unit for a complete and efficient system. Additionally, a bracket and connection pipe for the expansion vessel, two roof flashings, two 22mm compression elbows, two DN16 joiners, three PT1000 sensors, six DN16/22mm adapters, and twelve DN16 back nuts are included for easy installation. This kit can be expanded with additional panels by purchasing add-panel kits from our Roof Mounting section. With the On Roof Flat Plate Professional Solar Thermal Installation Kit, you'll have everything you need to start harnessing the power of the sun for your hot water needs. 1x Flate Plate Panel (Select Orientation) 4x Roof Brackets 1x Profile Rail Sets (of 2) 1x Profile Stop Sets (of 2) 1x Profile Fastening Set (of 4) 1x Panel Clamp Set (of 4) 1x 22mm Connection Set 1x Air Eliminator with Blanking Cap 1x Sorel MTDCV5 Controller 1x Pumpstation (please select) 1x Twinsol Pipework (please select length) 1x Antifreeze 5litres 1x Discharge Vessel 1x Expansion Vessel 18litres 1x Spirovent De-aerator 1x Overvoltage Protection Unit 1x Bracket for Expansion Vessel 1x Connection Pipe for Expansion Vessel 2x Roof Flashings 2x 22mm Compression Elbows 2x DN16 Joiners 3x PT1000 Sensors 6x DN16/22mm Adapters 12x DN16 Back Nuts On Roof Flat Plate Professional Solar Thermal Installation Kit If you wish to add more panels, please see our add-panel kits in the Roof Mounting section.

Read more less

Schematic_SHW_-_Standard_Layout  Flat_Plate_FINO_Brochure_1 Flat_Plate_FKF_ON_ROOF_Instructions The Flate Plate Panel solar water heating system is an all-in-one solution for those who want to reduce their carbon footprint and save on energy bills. This package includes everything you need to install a solar water heating system for your home or business. The package comes with 2 Flate Plate Panels, which you can choose to orientate in any direction, making it easy to fit to any roof. The panels are fastened to the roof using 3 sets of roof integrating fastening brackets and 2 wooden stop laths. The panels are secured in place using an in-roof flashing metal set, which fits neatly around the panels. The hydraulic connection set and 3/4 inch connection set connect the panels to the rest of the system. The air eliminator with extension and blanking cap ensures that the system runs smoothly without any air pockets. The Sorel MTDCV5 controller is the heart of the system, ensuring that the panels and pumpstation work together efficiently. The pumpstation is chosen by you and is an essential part of the system, pumping water through the panels and back into the tank. The Twinsol pipework, which is also selected by you, connects the pumpstation to the panels. The antifreeze, discharge vessel, expansion vessel, and spirovent de-aerator work together to ensure that the system is free of air pockets and has the right amount of pressure. The overvoltage protection unit ensures that the system is protected from power surges. The package includes a bracket for the expansion vessel and a connection pipe, as well as 2 DN16 joiners, 3 PT1000 sensors, and 6 DN16/22mm adapters. The DN16 back nuts are also included. This system is easy to install and requires minimal maintenance. It is an ideal solution for those who want to reduce their energy bills and their carbon footprint. 2x Flate Plate Panel (Select Orientation) 3x Roof Integrating Fastening Bracket Sets (of 3) 2x Wooden Stop Lath 1x In Roof Flashing Metal Set for x2 Panels 1x Hydraulic Connection Set 1x 3/4inch Connection Set 1x Air Eliminator with Extension & Blanking Cap 6x Wood Screws 1x Sorel MTDCV5 Controller 1x Pumpstation (please select) 1x Twinsol Pipework (please select length) 1x Antifreeze 5litres 1x Discharge Vessel 1x Expansion Vessel 18litres 1x Spirovent De-aerator 1x Overvoltage Protection Unit 1x Bracket for Expansion Vessel 1x Connection Pipe for Expansion Vessel 2x DN16 Joiners 3x PT1000 Sensors 6x DN16/22mm Adapters 12x DN16 Back Nuts

Read more less

DATA MANUAL Navitron_Panel_Assembly_2 Schematic_SHW_-_Standard_Layout The Navitron PRO-KIT5815 is a comprehensive solar thermal panel kit designed for professional installers who demand high quality and efficiency. This kit includes a Navitron 5815AL Solar Thermal Panel, available in your choice of color, which features 58mm tubes that provide 50% more heat than 47mm tubes. The Sorel MTDCV5 Controller and Pumpstation (select your preferred length) are included to ensure efficient and reliable operation. The Twinsol Pipework (select your preferred length) is made from flexible stainless steel duopipe, making installation fast and easy, without the need for heat/soldering. This kit also includes an antifreeze solution, a discharge vessel, an expansion vessel with bracket and connection pipe, and a Spirovent De-aerator to ensure system reliability and longevity. The Roof Mounting Kit, Overvoltage Protection Unit, and Roof Flashings (x2) are included to make installation simple and hassle-free. Additionally, this kit comes with 2x 22mm Compression Elbows, 2x DN16 Joiners, 3x PT1000 Sensors, 6x DN16/22mm Adapters, and 12x DN16 Back Nuts to provide a complete solution for a professional installation. The Navitron PRO-KIT5815 is recommended for cylinder sizes up to 200 liters and complies with MCS standards for renewable energy installations. Save time and money with this high-spec kit designed for professional installers who demand the best. PRO-KIT5815 Includes: 1x Navitron 5815AL Solar Thermal Panel (select colour) 1x Sorel MTDCV5 Controller 1x Pumpstation (please select) 1x Twinsol Pipework (please select length) 1x Antifreeze 5litres 1x Discharge Vessel 1x Expansion Vessel 18litres 1x Spirovent De-aerator 1x Roof Mounting Kit 1x Overvoltage Protection Unit 1x Bracket for Expansion Vessel 1x Connection Pipe for Expansion Vessel 2x Roof Flashings 2x 22mm Compression Elbows 2x DN16 Joiners 3x PT1000 Sensors 6x DN16/22mm Adapters 12x DN16 Back Nuts The Navitron Pro Kit is intended for high-spec installations. This kit is designed for the professional installer, where time is money - easier and quicker installation, professional finish and including optional extras required for MCS-compliance. Fast installation time is achieved by the use of flexible stainless steel duopipe, which is coupled directly to the pump station without the need for heat/soldering. The single line pump station includes all the necessary ancillary components, and connects to the expansion vessel with a flexible stainless steel coupling. Roof water-tightness is achieved using the high temperature flashing kits provided The 58mm tubes provide 50% more heat than the equivalent number of 47mm tubes. This kit is recommended for cylinder sizes up to 200litres.

Read more less

DATA MANUAL Navitron_Panel_Assembly_2 Schematic_SHW_-_Standard_Layout This kit includes a Navitron 5830AL Solar Thermal Panel (color can be selected), a Sorel MTDCV5 Controller, a Pumpstation (which can be selected), a Twinsol Pipework (length can be selected), 5 liters of Antifreeze, a Discharge Vessel, an Expansion Vessel (18 liters), a Spirovent De-aerator, a Roof Mounting Kit, an Overvoltage Protection Unit, a Bracket for Expansion Vessel, a Connection Pipe for Expansion Vessel, 2 Roof Flashings, 2 22mm Compression Elbows, 2 DN16 Joiners, 3 PT1000 Sensors, 6 DN16/22mm Adapters, and 12 DN16 Back Nuts. This kit is designed for professional installers and is intended for high-spec installations. The flexible stainless steel duopipe eliminates the need for heat/soldering, allowing for a quicker and easier installation. The single line pump station includes all the necessary ancillary components, and connects to the expansion vessel with a flexible stainless steel coupling. The high-temperature flashing kits provided ensure roof water-tightness. The 58mm tubes included provide 50% more heat than the equivalent number of 47mm tubes, and this kit is recommended for cylinder sizes up to 320 liters. PRO-KIT5830 Includes: 1x Navitron 5830AL Solar Thermal Panel (select colour) 1x Sorel MTDCV5 Controller 1x Pumpstation (please select) 1x Twinsol Pipework (please select length) 1x Antifreeze 5litres 1x Discharge Vessel 1x Expansion Vessel 18litres 1x Spirovent De-aerator 1x Roof Mounting Kit 1x Overvoltage Protection Unit 1x Bracket for Expansion Vessel 1x Connection Pipe for Expansion Vessel 2x Roof Flashings 2x 22mm Compression Elbows 2x DN16 Joiners 3x PT1000 Sensors 6x DN16/22mm Adapters 12x DN16 Back Nuts The Navitron Pro Kit is intended for high-spec installations. This kit is designed for the professional installer, where time is money - easier and quicker installation, professional finish and including optional extras required for MCS-compliance. Fast installation time is achieved by the use of flexible stainless steel duopipe, which is coupled directly to the pump station without the need for heat/soldering. The single line pump station includes all the necessary ancillary components, and connects to the expansion vessel with a flexible stainless steel coupling. Roof water-tightness is achieved using the high temperature flashing kits provided The 58mm tubes provide 50% more heat than the equivalent number of 47mm tubes. This kit is recommended for cylinder sizes up to 320litres.

Read more less

DATA MANUAL Navitron_Panel_Assembly_2 Schematic_SHW_-_East_West_2_Pumps Schematic_SHW_-_Standard_Layout The PRO-KIT EAST/WEST is the perfect solution for professional installers looking for a high-spec solar thermal system for two separate roof faces. This kit includes two Navitron Solar Thermal Panels, which you can select the size and color that best fits your needs. The Sorel MTDCV5 Controller ensures efficient and reliable operation of the system. The kit also includes a Single Line Pumpstation and an Additional Pumpstation, both of which you can select based on your requirements. The Twinsol Pipework comes in a length of your choice and helps to make the installation process easier and quicker. The kit includes two Discharge Vessels, two Expansion Vessels, a Spirovent De-aerator, two Overvoltage Protection Units, two Brackets for Expansion Vessel, and two Connection Pipes for Expansion Vessel. Four Roof Flashings and four 22mm Compression Elbows are also included for water-tightness. The kit is designed for easy installation, and the use of flexible stainless steel duopipe eliminates the need for heat/soldering. The single line pump station includes all the necessary ancillary components and connects to the expansion vessel with a flexible stainless steel coupling. The 58mm tubes provide 50% more heat than the equivalent number of 47mm tubes. With the PRO-KIT EAST/WEST, you get a professional finish and optional extras required for MCS-compliance. The kit comes with two DN16 Joiners, four PT1000 Sensors, ten DN16/22mm Adapters, twenty-two DN16 Back Nuts, and two DN16 Tees. Choose the Navitron Pro Kit for a hassle-free, high-performance, and professional solar thermal installation. PRO-KIT EAST/WEST Includes: 2x Navitron Solar Thermal Panel (please select size/colour) 1x Sorel MTDCV5 Controller 1x Single Line Pumpstation 1x Additional Pumpstation (please select) 1x Twinsol Pipework (please select length) 1x Antifreeze 5litres 2x Discharge Vessel 2x Expansion Vessel 18litres 1x Spirovent De-aerator 2x Roof Mounting Kit 2x Overvoltage Protection Unit 2x Bracket for Expansion Vessel 2x Connection Pipe for Expansion Vessel 4x Roof Flashings 4x 22mm Compression Elbows 2x DN16 Joiners 4x PT1000 Sensors 10x DN16/22mm Adapters 22x DN16 Back Nuts 2x DN16 Tee The Navitron Pro Kit is intended for high-spec installations on 2 separate roof faces. This kit is designed for the professional installer, where time is money - easier and quicker installation, professional finish and including optional extras required for MCS-compliance. Fast installation time is achieved by the use of flexible stainless steel duopipe, which is coupled directly to the pump station without the need for heat/soldering. The single line pump station includes all the necessary ancillary components, and connects to the expansion vessel with a flexible stainless steel coupling. Roof water-tightness is achieved using the high temperature flashing kits provided The 58mm tubes provide 50% more heat than the equivalent number of 47mm tubes.

Read more less

DATA MANUAL Navitron_Panel_Assembly_2 Schematic_SHW_-_East_West_2_Pumps Schematic_SHW_-_Standard_Layout Introducing the Navitron Pro Kit East/West, the ultimate solar thermal panel kit for high-spec installations on two separate roof faces. This kit is designed for professional installers who value their time and require a faster and more efficient installation process. The Navitron Pro Kit comes complete with two Navitron Solar Thermal Panels that you can select the size and color of your preference. These panels are made with 58mm tubes, providing 50% more heat than the equivalent number of 47mm tubes. Additionally, this kit includes a Sorel MTDCV5 Controller, a Single Line Pumpstation, an Additional Pumpstation of your choice, and Twinsol Pipework that you can select the length of. The Navitron Pro Kit also comes with Antifreeze 5litres, two Discharge Vessels, two Expansion Vessels of 18litres, a Spirovent De-aerator, and two Overvoltage Protection Units. Furthermore, it includes two Brackets for Expansion Vessel, two Connection Pipes for Expansion Vessel, four Roof Flashings, four 22mm Compression Elbows, two DN16 Joiners, ten DN16/22mm Adapters, twenty-two DN16 Back Nuts, and two DN16 Tee, providing everything you need for a professional and reliable installation. The Navitron Pro Kit has been pre-assembled for your convenience, and the flexible stainless steel duopipe ensures that the kit can be coupled directly to the pump station without the need for heat/soldering. This saves time and ensures a professional finish. The single line pump station includes all necessary ancillary components, and it connects to the expansion vessel with a flexible stainless steel coupling. The high temperature flashing kits provide a water-tight seal for the roof. For further information about the intended application of this kit, please refer to the schematic available in the Documents & Downloads section. If you require any variations, please visit our Evacuated Tube Kit Building Page. Experience a faster and more efficient installation process with the Navitron Pro Kit East/West. Upgrade your solar thermal panel system with the ultimate professional-grade kit. PRO-KIT EAST/WEST Includes: 2x Navitron Solar Thermal Panel (please select size/colour) 1x Sorel MTDCV5 Controller 1x Single Line Pumpstation 1x Additional Pumpstation (please select) 1x Twinsol Pipework (please select length) 1x Antifreeze 5litres 2x Discharge Vessel 2x Expansion Vessel 18litres 1x Spirovent De-aerator 2x Roof Mounting Kit 2x Overvoltage Protection Unit 2x Bracket for Expansion Vessel 2x Connection Pipe for Expansion Vessel 4x Roof Flashings 4x 22mm Compression Elbows 2x DN16 Joiners 4x PT1000 Sensors 10x DN16/22mm Adapters 22x DN16 Back Nuts 2x DN16 Tee

Read more less

DATA MANUAL Navitron_Panel_Assembly_2 Schematic_SHW_-_Standard_Layout The Navitron Pro Kit is intended for high-spec installations. This kit is designed for the professional installer, where time is money - easier and quicker installation, professional finish and including optional extras required for MCS-compliance. Fast installation time is achieved by the use of flexible stainless steel duopipe, which is coupled directly to the pump station without the need for heat/soldering. The single line pump station includes all the necessary ancillary components, and connects to the expansion vessel with a flexible stainless steel coupling. Roof water-tightness is achieved using the high temperature flashing kits provided The 58mm tubes provide 50% more heat than the equivalent number of 47mm tubes. This kit is recommended for cylinder sizes up to 250litres. PRO-KIT5820 Includes: 1x Navitron 5820AL Solar Thermal Panel (select colour) 1x Sorel MTDCV5 Controller 1x Pumpstation (please select) 1x Twinsol Pipework (please select length) 1x Antifreeze 5litres 1x Discharge Vessel 1x Expansion Vessel 18litres 1x Spirovent De-aerator 1x Roof Mounting Kit 1x Overvoltage Protection Unit 1x Bracket for Expansion Vessel 1x Connection Pipe for Expansion Vessel 2x Roof Flashings 2x 22mm Compression Elbows 2x DN16 Joiners 3x PT1000 Sensors 6x DN16/22mm Adapters 12x DN16 Back Nuts

Read more less