Victron EasySolar, an all-in-one solar power solution. These combine an MPPT solar charge controller, an inverter/charger and AC breakers for distribution all in one enclosure. Easy to install with minimal wiring. Ideal for small off-grid systems with loads such as lighting, computers, chargers, electronic appliances and small power appliances. Features Up to three strings of PV can be connected to the three sets of MC4 connectors The MultiPlus Compact and MPPT charge controller share the battery cables for power. The batteries can be charged by solar power via a MPPT charge controller and/or AC power through the inverter/charger from either the grid or a generator AC Distribution, distribution consists of an RCD and four AC outputs which are protected by two 10A and two 16A breakers. One 16A output is controlled by the AC input, it will only switch on when the grid/genset is available Power assist protects the utility grid or generator supply from being overloaded by adding extra inverter power when required Several software programs are available to configure the system from a grid interactive system or a stand-alone applications. Please follow the link for more information: https://www.victronenergy.nl/support-and-downloads/software 5 years warranty

Read more less

Victron EasySolar, an all-in-one solar power solution. These combine an MPPT solar charge controller, an inverter/charger and AC breakers for distribution all in one enclosure. Easy to install with minimal wiring. Ideal for small off-grid systems with loads such as lighting, computers, chargers, electronic appliances and small power appliances. Features Up to three strings of PV can be connected to the three sets of MC4 connectors The MultiPlus Compact and MPPT charge controller share the battery cables for power. The batteries can be charged by solar power via a MPPT charge controller and/or AC power through the inverter/charger from either the grid or a generator AC Distribution, distribution consists of an RCD and four AC outputs which are protected by two 10A and two 16A breakers. One 16A output is controlled by the AC input, it will only switch on when the grid/genset is available Power assist protects the utility grid or generator supply from being overloaded by adding extra inverter power when required Several software programs are available to configure the system from a grid interactive system or a stand-alone applications. Please follow the link for more information: https://www.victronenergy.nl/support-and-downloads/software 5 years warranty Brand: Victron Energy Voltage: 48V Transfer Switch (A): 50 Cont. output power at 25°C (VA): 5000 Peak power (W): 9000 Efficiency : 96% Dimensions: H604 x W323 x D253mm Weight (kg): 38.6Kg IP (Ingress Protection) rating: : IP 21 Output Voltage: 230V Warranty:

Read more less

Victron EasySolar 48V, 5000VA Color Control The all-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. Color Control panel Two outstanding functions: – Prioritizes battery charging by the MPPT charge controller – Connects to the internet, enabling remote monitoring (VRM website) and remote control. AC distribution The AC distribution consists of a RCD (30mA / 63A) and four AC outputs protected by two 10A and two 16A circuit breakers. An additional 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.

Read more less

Victron EasySolar 12V and 24V, 1600VA The all-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. EasySolar EasySolar 12/1600/70 EasySolar 24/1600/40 Part Number CEP121621000 CEP241621010 Transfer switch 16A 16A Input voltage range 9,5 – 17V 19 – 33V Charge current house battery (4) 70A 40A Model MPPT 100/50 MPPT 100/50 Weight 15kg 15kg Dimensions (hxwxd) 745 x 214 x 110mm 745 x 214 x 110mm

Read more less

The main purpose of this kit is to store your spare solar energy and use it during the evening when the sun has gone down. Why implement grid backup? Get security for the future - from power cuts and rising energy bills Have the ability to use most or all of your generation - your energy costs less than importing grid energy Bask in the knowledge that you are your own power station. Contents: MultiPlus C 1200VA inverter/charger - 12V, 50A 1m Single Core 35mm2 Battery Cable with M8 Crimps 2 x 0.5m Single Core 35mm2 Battery Cable with M8/M10 Crimps 300A Battery isolator switch, 900A for 30 secs, 48 Volt, M10 LiFePO4 Battery 12,8V/200Ah Smart VE.Bus BMS (Battery Management System) 2 x RJ45 UTP Cable 3m (data cable) Color Control GX + Wall mounted enclosure (monitoring panel) RS485 to USB interface 5m (data cable) Energy Meter EM24 - 3 phase - max 65A/phase CCGX Wi-Fi module simple (Nano USB Wi-Fi dongle) 1m dual core DC cable with lace and ring connectors (power cable)

Read more less

Victron EasySolar-II 48V 5kVa MPPT 250/100 GX The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: • A MultiPlus-II inverter/charger • A SmartSolar MPPT-Tr solar charge controller • A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device includes: • A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. • A USB port • An Ethernet port • A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.

Read more less

Victron EasySolar-II 24V/48V 3kVa MPPT 250/70 GX The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: • A MultiPlus-II inverter/charger • A SmartSolar MPPT-Tr solar charge controller • A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device includes: • A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. • A USB port • An Ethernet port • A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. Please note: This inverter has a 12-16 week lead time for stock.

Read more less

Victron EasySolar-II 24V 3kVa MPPT 250/70 GX The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: • A MultiPlus-II inverter/charger • A SmartSolar MPPT-Tr solar charge controller • A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device includes: • A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. • A USB port • An Ethernet port • A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.

Read more less

Victron EasySolar, an all-in-one solar power solution. These combine an MPPT solar charge controller, an inverter/charger and AC breakers for distribution all in one enclosure. Easy to install with minimal wiring. Ideal for small off-grid systems with loads such as lighting, computers, chargers, electronic appliances and small power appliances. Features Up to three strings of PV can be connected to the three sets of MC4 connectors The MultiPlus Compact and MPPT charge controller share the battery cables for power. The batteries can be charged by solar power via a MPPT charge controller and/or AC power through the inverter/charger from either the grid or a generator AC Distribution, distribution consists of an RCD and four AC outputs which are protected by two 10A and two 16A breakers. One 16A output is controlled by the AC input, it will only switch on when the grid/genset is available Power assist protects the utility grid or generator supply from being overloaded by adding extra inverter power when required Several software programs are available to configure the system from a grid interactive system or a stand-alone applications. Please follow the link for more information: https://www.victronenergy.nl/support-and-downloads/software 5 years warranty

Read more less

Victron EasySolar, an all-in-one solar power solution. These combine an MPPT solar charge controller, an inverter/charger and AC breakers for distribution all in one enclosure. Easy to install with minimal wiring. Ideal for small off-grid systems with loads such as lighting, computers, chargers, electronic appliances and small power appliances. Features Up to three strings of PV can be connected to the three sets of MC4 connectors The MultiPlus Compact and MPPT charge controller share the battery cables for power. The batteries can be charged by solar power via a MPPT charge controller and/or AC power through the inverter/charger from either the grid or a generator AC Distribution, distribution consists of an RCD and four AC outputs which are protected by two 10A and two 16A breakers. One 16A output is controlled by the AC input, it will only switch on when the grid/genset is available Power assist protects the utility grid or generator supply from being overloaded by adding extra inverter power when required Several software programs are available to configure the system from a grid interactive system or a stand-alone applications. Please follow the link for more information: https://www.victronenergy.nl/support-and-downloads/software Voltage: 12 Brand: Victron Energy Cont. output power at 25°C (VA): 1600VA Peak power (W): 3000W Transfer Switch (A): 16A Charge current house battery (A): 70A Efficiency : 98% Dimensions: H745 x W214 x D110mm IP (Ingress Protection) rating: : IP21 Output Voltage: 230V Warranty: 5 Years

Read more less