Solar Pumps and Pump Stations

Our Solar Pumps and Pumpstations are designed to provide you with a reliable and cost-effective way to pump water in remote locations where traditional electrical infrastructure is not available. With our solar-powered solutions, you can pump water for irrigation, livestock, and household use while reducing your dependence on fossil fuels.

Our Solar Pumps and Pumpstations are made from high-quality materials that ensure they are durable and long-lasting. They are also highly efficient, meaning that they can operate on low solar energy inputs, making them ideal for use in areas with low solar irradiance.

Our Solar Pumps and Pumpstations are available in a range of sizes and capacities to suit the needs of any application. Whether you need a small pump for household use or a large pump for irrigation purposes, our range of sizes ensures that you can find a pump that fits your needs.

Our Solar Pumps and Pumpstations are easy to install and maintain, with a simple design that makes them hassle-free to use. They are also highly reliable, meaning that you can count on them to deliver water when you need it most.

At our company, we take pride in offering top-quality products and excellent customer service. We are committed to providing you with a Solar Pump or Pumpstation that meets your specific needs and exceeds your expectations. So why wait? Start pumping water with our Solar Pumps and Pumpstations today and enjoy the benefits of clean, renewable energy.

4 products

  • Pumpstation Dual Line - with Grundfos UPM3 Solar 25-75 - Solar chargex

    Navitron Pumpstation Dual Line - with Grundfos UPM3 Solar 25-75

    18 in stock

    Twin_Line_Pump_station_Instruction_2 pump 2-Way Solar Pump unit. Up to 38 l/min with Grundfos UPM3 Solar 25-75 Pump The unit with 1inch (180 mm) solar circulating pump, fully assembled and tested, consists of: FLOW: Temperature gauge Distance between supply and return 125mm RETURN: Flowmeter with flow regulation with filling and draining valves. Synchronous solar high efficiency circulating pump with cables. Flanged 3-way ball valve with non return valve 10 mbar (which can be excluded by rotating the handle by 45°) supplied with in-handle thermometer (coded blue, range 0 °C-120°C). Security unit 6 bar with manometer¸50 mm 0-10 bar with 3/4" Male connection to the expansion vessel. End of drain side: 3/4" F. Connection on right side. Centre distance 125 mm. EPP insulation box (Measurements: 155x425x150) A special back plate fixes the unit to the insulation box and it allows a quick fitting to the wall or to the solar cylinder. Dimensions: 372 x 325 x 202mm PN 10. Constant temperature 120°C; (short time temperature: 160°C for 20 s). External connections: 3/4" Male Pumpstation with PWM and Mechanic Relay options Pump Info: UPM3 SOLAR is an OEM high efficient circulator offering flexible solutions for thermal solar systems. It is designed to work both with and without PWM signal, allowing you to upgrade your systems without having to change the controller. With PWM Signal: - Externally speed controlled - Choice of one of 4 PWM SOLAR Profile C curves Without PWM Signal: - Externally speed controlled - Using the Mini Superseal signal cable connection - Configured via user interface or pre-set in Grundfos factory Characteristic Features - High Efficiency circulator for integration in HVAC SOLAR systems; EEI = 0.20 EN16297/3 - Smallest design ever for a circulator; smaller than the well-known UPS circulator - Integrated OEM high efficient circulator with one specific external control mode - Active or passive inrush current limitation - Ambient temperatures of up to 70° Celsius. Benefits - Lowest space requirements ever for a circulator integrated in an appliance - Optimised design fit for easy accessibility Easy access to the user interface from front Easy access to the connectors from front Easy access to the pump head screws from the front Easy access to the de-blocking screw from front - Intelligent configuration Different signals and profiles available (PWM A, PWM C, KMBus) Standard return signal showing power consumption, alarm and operation status Other customised input profiles and different return profiles are possible e.g. flow estimation - Ready for Conversion according Ecodesign requirement for August, 2015 exceeding benchmark level; EEI = 0.20 EN16297/3 - Unmatched reliability Field and lab tested product quality Ceramic bearing shaft - The UPM3 comes equipped with ceramic bearing shafts for a long and trouble-free lifetime. The ceramic material is extremely durable and will not wear. Double de-blocking system - Electronic de-blocking that maintains the maximum starting torque up to 25 Ncm and manual de-blocking accessible from the front without demounting the control box. High temperature resilience - The resilience to heat will enhance the possibilities of system integration enormously. Ambient temperatures of up to 70° Celsius. Warranty: 2 Years

    18 in stock

    $556.00

  • Pumpstation Dual Line - with Grundfos UPM3 Solar 25-75 & Air Vent - Solar chargex

    Navitron Pumpstation Dual Line - with Grundfos UPM3 Solar 25-75 & Air Vent

    18 in stock

    Twin_Line_Pump_station_Instruction_2 pump 2-Way Solar Pump unit. Up to 38 l/min with Grundfos UPM3 Solar 25-75 Pump and in-built de-aerator. The unit with 1inch (180 mm) solar circulating pump, fully assembled and tested, consists of: FLOW: Temperature gauge Distance between supply and return 125mm RETURN: Flowmeter with flow regulation with filling and draining valves. Synchronous solar high efficiency circulating pump with cables. Flanged 3-way ball valve with non return valve 10 mbar (which can be excluded by rotating the handle by 45°) supplied with in-handle thermometer (coded blue, range 0 °C-120°C). Security unit 6 bar with manometer¸50 mm 0-10 bar with 3/4" Male connection to the expansion vessel. End of drain side: 3/4" F. Connection on right side. Centre distance 125 mm. EPP insulation box (Measurements: 155x425x150) A special back plate fixes the unit to the insulation box and it allows a quick fitting to the wall or to the solar cylinder. Dimensions: 372 x 325 x 202mm PN 10. Constant temperature 120°C; (short time temperature: 160°C for 20 s). External connections: 3/4" Male Pumpstation with PWM and Mechanic Relay options Pump Info: UPM3 SOLAR is an OEM high efficient circulator offering flexible solutions for thermal solar systems. It is designed to work both with and without PWM signal, allowing you to upgrade your systems without having to change the controller. With PWM Signal: - Externally speed controlled - Choice of one of 4 PWM SOLAR Profile C curves Without PWM Signal: - Externally speed controlled - Using the Mini Superseal signal cable connection - Configured via user interface or pre-set in Grundfos factory Characteristic Features - High Efficiency circulator for integration in HVAC SOLAR systems; EEI = 0.20 EN16297/3 - Smallest design ever for a circulator; smaller than the well-known UPS circulator - Integrated OEM high efficient circulator with one specific external control mode - Active or passive inrush current limitation - Ambient temperatures of up to 70° Celsius. Benefits - Lowest space requirements ever for a circulator integrated in an appliance - Optimised design fit for easy accessibility Easy access to the user interface from front Easy access to the connectors from front Easy access to the pump head screws from the front Easy access to the de-blocking screw from front - Intelligent configuration Different signals and profiles available (PWM A, PWM C, KMBus) Standard return signal showing power consumption, alarm and operation status Other customised input profiles and different return profiles are possible e.g. flow estimation - Ready for Conversion according Ecodesign requirement for August, 2015 exceeding benchmark level; EEI = 0.20 EN16297/3 - The UPM3 comes equipped with ceramic bearing shafts for a long and trouble-free lifetime. The ceramic material is extremely durable and will not wear. Double de-blocking system - Electronic de-blocking that maintains the maximum starting torque up to 25 Ncm and manual de-blocking accessible from the front without demounting the control box. High temperature resilience - The resilience to heat will enhance the possibilities of system integration enormously. Ambient temperatures of up to 70° Celsius. Warranty: 2 Years

    18 in stock

    $555.00

  • Pumpstation Single Line - with Grundfos UPM3 Solar 25-75 - Solar chargex

    Navitron Pumpstation Single Line - with Grundfos UPM3 Solar 25-75

    18 in stock

    Single_Line_Pump_station_Instruction_1 Pumpstation_EN_-_S1_Solar_1 pump Single-Way Solar Pump unit. Up to 38 l/min with Grundfos UPM3 Solar 25-75 Pump The unit with 1inch (180 mm) solar circulating pump, fully assembled and tested, consists of: RETURN: Flowmeter with flow regulation with filling and draining valves. Synchronous solar high efficiency circulating pump with cables. Flanged 3-way ball valve with non return valve 10 mbar (which can be excluded by rotating the handle by 45 °) supplied with in-handle thermometer (coded blue, range 0 °C-120°C). Security unit 6 bar with manometer ø50 mm 0-10 bar with 3/4" Male connection to the expansion vessel. End of drain side: 3/4" F. Connection on right side. Centre distance 125 mm. EPP insulation box (Measurements: 155x425x150) A special back plate fixes the unit to the insulation box and it allows a quick fitting to the wall or to the solar cylinder. Dimensions: 215x440x150 mm PN 10. Constant temperature 120°C; (short time temperature: 160 °C for 20 s). External connections: 3/4" Male Pumpstation with PWM and Mechanic Relay options Pump Info: UPM3 SOLAR is an OEM high efficient circulator offering flexible solutions for thermal solar systems. It is designed to work both with and without PWM signal, allowing you to upgrade your systems without having to change the controller. With PWM Signal: - Externally speed controlled - Choice of one of 4 PWM SOLAR Profile C curves Without PWM Signal: - Externally speed controlled - Using the Mini Superseal signal cable connection - Configured via user interface or pre-set in Grundfos factory Characteristic Features - High Efficiency circulator for integration in HVAC SOLAR systems; EEI = 0.20 EN16297/3 - Smallest design ever for a circulator; smaller than the well-known UPS circulator - Integrated OEM high efficient circulator with one specific external control mode - Active or passive inrush current limitation - Ambient temperatures of up to 70° Celsius. Benefits - Optimised design fit for easy accessibility Easy access to the user interface from front Easy access to the connectors from front Easy access to the pump head screws from the front Easy access to the de-blocking screw from front - Intelligent configuration Different signals and profiles available (PWM A, PWM C, KMBus) Standard return signal showing power consumption, alarm and operation status Other customised input profiles and different return profiles are possible e.g. flow estimation - Ready for Conversion according Ecodesign requirement for August, 2015 exceeding benchmark level; EEI = 0.20 EN16297/3 - The UPM3 comes equipped with ceramic bearing shafts for a long and trouble-free lifetime. The ceramic material is extremely durable and will not wear. Double de-blocking system - Electronic de-blocking that maintains the maximum starting torque up to 25 Ncm and manual de-blocking accessible from the front without demounting the control box. High temperature resilience - The resilience to heat will enhance the possibilities of system integration enormously. Ambient temperatures of up to 70° Celsius.  

    18 in stock

    $437.00

  • Solar Rated High-Efficiency Pump - Solar chargex

    Halm Optimo Solar Rated High-Efficiency Pump

    20 in stock

    The Halm Optimo Basic 25-6.0 G130 is a high-efficiency circulation pump designed specifically for solar applications. With a rate of flow of up to 3.2m3/h and a pressure head of 6m, it is capable of providing reliable and efficient circulation of water through your solar heating system. The pump is IP42 rated, ensuring it is protected against dust and water ingress. The pump features a thread connection of 1.5", making it easy to integrate into your existing solar heating system. In addition, it has been designed with low energy consumption in mind, helping you to save on energy costs and reduce your carbon footprint. Overall, the Halm Optimo Basic 25-6.0 G130 is a reliable and efficient circulation pump that is perfect for solar heating systems. Its high flow rate and pressure head make it suitable for a variety of applications, while its low energy consumption ensures it is cost-effective and environmentally friendly. Solar Rated High-efficiency Circulation Pump Halm Optimo Basic 25-6.0 G130 Rate of Flow: Up to 3.2m3/h Pressure head: 6m IP42 Rated Thread connection 1.5" Low energy consumption

    20 in stock

    $265.00

Blog posts

  • , by radoslaw majchrzak A Guide to Sustainable Energy Investment

    Read more 

  • Installation Guide for the Navitron 305L Unvented Stainless Steel Cylinder

    , by Shopify API Installation Guide for the Navitron 305L Unvented Stainless Steel Cylinder

    Read more 

  • Discover the Convenience of RFID and LBA Technology in the Alfen Eve Single Pro-line 3PH

    , by Shopify API Discover the Convenience of RFID and LBA Technology in the Alfen Eve Single Pro-line 3PH

    Read more 

Login

Forgot your password?

Don't have an account yet?
Create account