The battery cells in the Smart Lithium batteries are protected against over-charge, under-charge, charging at too low temperatures as well as charging at too high temperatures.
As part of the protection the battery has an integrated Balancing, Temperature and Voltage control system, the BTV. The BTV connects to an external Battery Management System, the BMS.
In case of multiple batteries, the BTVs of several batteries are daisy chained and then connected to the BMS.
You will need a Victron VE.Bus BMS or a Victron smallBMS to use this battery.
The battery cells in the Smart Lithium batteries are protected against over-charge, under-charge, charging at too low temperatures as well as charging at too high temperatures.
As part of the protection the battery has an integrated Balancing, Temperature and Voltage control system, the BTV. The BTV connects to an external Battery Management System, the BMS.
In case of multiple batteries, the BTVs of several batteries are daisy chained and then connected to the BMS.
You will need a Victron VE.Bus BMS or a Victron smallBMS to use this battery.
The battery cells in the Smart Lithium batteries are protected against over-charge, under-charge, charging at too low temperatures as well as charging at too high temperatures.
As part of the protection the battery has an integrated Balancing, Temperature and Voltage control system, the BTV. The BTV connects to an external Battery Management System, the BMS.
In case of multiple batteries, the BTVs of several batteries are daisy chained and then connected to the BMS.
You will need a Victron VE.Bus BMS or a Victron smallBMS to use this battery.
The SuperPack batteries are extremely easy to install, not needing any additional components.
The internal switch will disconnect the battery in case of over discharge, over charge or high temperature.
The batteries can be connected in parallel. Series connection is not allowed.
Our 1KW Off-grid Solar System Kit is part of a range of larger solar kits designed to provide power to off-grid locations, this kit is suitable for small-scale stables, workshops and houses. The main use for this kit is to be used as a:
Completely off-grid power system which can have a generator or mains as a backup
Within the kit you have all parts that you require to start producing you own power within 24 hours of installation. It is simple to construct and comes with full instructions. We are able to provide technical assistance over the phone if necessary. There are many optional parts of the system which can be used for extra safety and monitoring.
The solar panels are intended to be mounted on a pantile roof using a rail system. Alternatively you can use ConSoles to mount the panels on a flat roof or on the ground. The MPPT charge controller is to be connected to the batteries first, making sure they are wired for a balanced load and charge. The 10m of extension cable from the solar runs to the MPPT charge controller via the roof or other access ways. The batteries are then connected to the inverter/charger making sure to balance the connections.
You are essentially provided a 240V mains supply which you can wire into a mains consumer unit or sub-board. To run 12/24/48V appliances you can either run straight off the batteries or purchase a DC-DC converter. Note: if you have DC loads and have a CCGX in the system then it would be recommended to purchase a BMV-700 to assist in calculating an accurate State of Charge (SoC).
The 1000W kit provides up to 1,980 watt hours per day during winter, 3,960 watt hours during spring/autumn and 6,930 watt hours during summer. The batteries provide 3,960 watt hours backup to run your appliances during the night.
The kit is suitable to power appliances such as lighting, power tools, battery charger, car vac, alarm systems etc for around 4-6 hours per day. If you wish to power larger appliances or run these for longer, please consider a larger kit.
Contents:
3 x Canadian Solar 330W HiDM High Density MONO PERC Black Frame
Renusol VarioSole Rail Mounting System
Multi Contact 10m Single Core 4mm2 Extension Cable Pair with MC4 Connectors
SmartSolar MPPT 150/35 Charge Controller
2 x 1m Single Core 4mm2 Cable with M8 Crimps
2 x Victron 12V/165Ah GEL Deep Cycle Battery
0.25m Single Core 25mm2 Battery Cable with M8 Crimps
Victron MultiPlus Compact 1600VA – 24V, 40A Outlet (Please call if you require a larger inverter)
300A Battery isolator rotary switch, M10
Wiring Diagram and User Manuals
Note:
Panels may vary according to stock levels, but will be as close to 1kw as possible
The above mounting system is based on a pantile roof. An alternative mounting system may be required for slate or flat roofs
If connecting the MultiPlus to the grid, you need to check with the DNO for permission
Our 270W Select Solar Power Station is a big step forward to achieving energy self-sufficiency in a domestic home, garage, holiday cottage, business or anywhere that would be affected by power cuts and the cost installing mains cable is very high. Within the kit you have all parts that you may require to start producing you own power within an hour of installation. It is very simple to construct and comes with full instructions.
The solar panel must be located outside and an aluminium stand is supplied to stand the panel firmly on the ground or a flat roof (the multi position rack allows you to achieve the optimum angle in all seasons). The 5m of extension cable runs to the battery and other equipment, first into the charge controller, then into the battery and finally through the inverter. You are essentially provided a mains wall socket to do with as you please. To run 12V appliances you can either run straight off the battery or purchase an additional 12V Socket.
The 270W kit provides on average 1080 watt hours per day and is suited for garages, workshops, stables, garden sheds, agricultural buildings and beach huts. It can normally power appliances such as lawn mowers, large power tools, vacuum and dual batter chargers etc for around 2-4 hours per day. If you wish to power larger appliances or run these for longer or during winter, please consider a larger station.
Can be seen as an investment due to ever increasing energy prices
Contents:
Perlight 270W Delta Mono PERC Triple Black 54 Cell
Multi Position Aluminium Rack (Please call if you require an alternative mounting system)
Multi Contact 5m Single Core 4mm2 Extension Cable Pair with MC4 Connectors
Victron SmartSolar MPPT 100/20 (12/24V)
2 x 1m Single Core 4mm2 Cable with M8 Crimps
Victron 12V/110Ah AGM Deep Cycle Battery
1m Single Core 16mm2 Battery Cable with M8 Crimps
2 x 0.5m Single Core 16mm2 Battery Cable with M8/M10 Crimps
300A Battery isolator switch, 900A for 30 secs, 48 Volt, M10
Victron Phoenix 800VA - 12V DC Inverter with 240V AC UK Fixed Socket Outlet (Please call if you require a larger inverter)
Wiring Diagram and User Manuals
Our 2KW Off-grid Solar System Kit is part of a range of larger solar kits designed to provide power to off-grid locations, this kit is suitable for cabins, workshops and offices. The main use for this kit is to be used as a:
Completely off-grid power system which can have a generator or mains as a backup
Within the kit you have all parts that you require to start producing you own power within 24 hours of installation. It is simple to construct and comes with full instructions. We are able to provide technical assistance over the phone if necessary. There are many optional parts of the system which can be used for extra safety and monitoring.
The solar panels are intended to be mounted on a pantile roof using a rail system. Alternatively you can use ConSoles to mount the panels on a flat roof or on the ground. The MPPT charge controller is to be connected to the batteries first, making sure they are wired for a balanced load and charge. The 10m of extension cable from the solar runs to the MPPT charge controller via the roof or other access ways. The batteries are then connected to the inverter/charger making sure to balance the connections.
You are essentially provided a 240V mains supply which you can wire into a mains consumer unit or sub-board. To run 12/24/48V appliances you can either run straight off the batteries or purchase a DC-DC converter. Note: if you have DC loads and have a CCGX in the system then it would be recommended to purchase a BMV-700 to assist in calculating an accurate State of Charge (SoC).
The 2000W kit provides up to 4,000 watt hours per day during winter, 8,000 watt hours during spring/autumn and 14,000 watt hours during summer. The batteries provide 7,920 watt hours backup to run your appliances during the night.
The kit is suitable to power appliances such as lighting, power tools, battery charger, car vac, alarm systems etc for around 4-6 hours per day. If you wish to power larger appliances or run these for longer, please consider a larger kit.
Contents:
6 x Canadian Solar 330W HiDM High Density MONO PERC Black Frame
Renusol VarioSole Rail Mounting System
Multi Contact 10m Extension Cable Pair with MC4 Connectors
MC4 Solar PV connectors - Pair of Y Branches
SmartSolar MPPT 150/70-Tr Charge Controller
2 x 1m Single Core 16mm2 Solar Cable with M8 Crimps
2 x Victron 12V/220Ah GEL Deep Cycle Battery
0.25m Single Core 35mm2 Battery Cable with M8 Crimps
2 x 1m Single Core 35mm2 Battery Cable with M8 Crimps
Victron MultiPlus Compact 2000VA – 24V, 50A Outlet (Please call if you require a larger inverter)
300A Battery isolator rotary switch, M10
Wiring Diagram and User Manuals
Note:
Panels may vary according to stock levels, but will be as close to 2kw as possible
The above mounting system is based on a pantile roof. An alternative mounting system may be required for slate or flat roofs
If connecting the MultiPlus to the grid, you need to check with the DNO for permission
Our 340W Select Solar Power Station is a big step forward to achieving energy self-sufficiency in a domestic home, garage, holiday cottage, business or anywhere that would be affected by power cuts and the cost installing mains cable is very high. Within the kit you have all parts that you may require to start producing you own power within an hour of installation. It is very simple to construct and comes with full instructions.
The solar panel must be located outside and an aluminium stand is supplied to stand the panel firmly on the ground or a flat roof (the multi position rack allows you to achieve the optimum angle in all seasons). The 5m of extension cable runs to the battery and other equipment, first into the charge controller, then into the battery and finally through the inverter. You are essentially provided a mains wall socket to do with as you please. To run 12V appliances you can either run straight off the battery or purchase an additional 12V Socket.
The 340W kit provides on average 1360 watt hours per day and is suited for garages, workshops, stables, garden sheds, agricultural buildings and beach huts. It can normally power appliances such as lawn mowers, large power tools, vacuum and dual batter chargers etc for around 2-4 hours per day. If you wish to power larger appliances or run these for longer or during winter, please consider a larger station.
Contents:
JA Solar 340W Mono MBB Percium Half-Cell Black Frame MC4
Multi Position Aluminium Rack (Please call if you require an alternative mounting system)
Multi Contact 5m Single Core 4mm2 Extension Cable Pair with MC4 Connectors
Victron SmartSolar MPPT 100/30 (12/24V)
2 x 1m Single Core 4mm2 Cable with M8 Crimps
Victron 12V/110Ah AGM Deep Cycle Battery
1m Single Core 25mm2 Battery Cable with M8 Crimps
2 x 0.5m Single Core 25mm2 Battery Cable with M8/M10 Crimps
300A Battery isolator switch, 900A for 30 secs, 48 Volt, M10
Victron Phoenix 1200VA - 12V DC Inverter with 240V AC UK Fixed Socket Outlet (Please call if you require a larger inverter)
Wiring Diagram and User Manuals
Our 3KW Off-grid Solar System Kit is part of a range of larger solar kits designed to provide power to off-grid locations, this kit is suitable for large cabins, workshops and offices. The main use for this kit is to be used as a:
Completely off-grid power system which can have a generator or mains as a backup
Within the kit you have all parts that you require to start producing you own power within 24 hours of installation. It is simple to construct and comes with full instructions. We are able to provide technical assistance over the phone if necessary. There are many optional parts of the system which can be used for extra safety and monitoring.
The solar panels are intended to be mounted on a pantile roof using a rail system. Alternatively you can use ConSoles to mount the panels on a flat roof or on the ground. The MPPT charge controller is to be connected to the batteries first, making sure they are wired for a balanced load and charge. The 10m of extension cable from the solar runs to the MPPT charge controller via the roof or other access ways. The batteries are then connected to the inverter/charger making sure to balance the connections.
You are essentially provided a 240V mains supply which you can wire into a mains consumer unit or sub-board. To run 12/24/48V appliances you can either run straight off the batteries or purchase a DC-DC converter. Note: if you have DC loads and have a CCGX in the system then it would be recommended to purchase a BMV-700 to assist in calculating an accurate State of Charge (SoC).
The 3000W kit provides up to 6,000 watt hours per day during winter, 12,000 watt hours during spring/autumn and 21,000 watt hours during summer. The batteries provide 7,920 watt hours backup to run your appliances during the night.
The kit is suitable to power appliances such as fridges, machinery, heaters, vacuums, office equipment etc for around 4-6 hours per day. If you wish to power larger appliances or run these for longer, please consider a larger kit.
Contents:
9 x Canadian Solar 330W HiDM High Density MONO PERC Black Frame
Renusol VarioSole Rail Mounting System
Multi Contact 10m Extension Cable Pair with MC4 Connectors
2 x MC4 Solar PV connectors - Pair of Y Branches
SmartSolar MPPT 150/60-Tr Charge Controller
2 x 1m Single Core 16mm2 Solar Cable with M8 Crimps
4 x Victron 12V/165Ah GEL Deep Cycle Battery
3 x 0.25m Single Core 35mm2 Battery Cable with M8 Crimps
2 x 1m Single Core 35mm2 Battery Cable with M8 Crimps
Victron MultiPlus-II 3000VA – 48V, 35A Outlet 32A Transfer (Please call if you require a larger inverter)
300A Battery isolator rotary switch, M10
Wiring Diagram and User Manuals
Note:
Panels may vary according to stock levels, but will be as close to 3kw as possible
The above mounting system is based on a pantile roof. An alternative mounting system may be required for slate or flat roofs
If connecting the MultiPlus to the grid, you need to check with the DNO for permission
Victron Bluesolar Charger MPPT 150/70
A solar charger gathers energy from your solar panels, and then stores it in your batteries. Because the Victron Blue Solar MPPT Charge Controller uses the latest, fastest technology. BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time.
Features of the Victron Bluesolar charger MPPT 150/70:
Ultra fast Maximum Power Point Tracking (MPPT)
By constantly monitoring the voltage and current output of your solar panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. In poor conditions, particularly overcast or clouded skies, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Specification:
Type: MPPT 150/70
Nominal Battery Voltages (Vdc): 12/24/48V Auto Select
Max. Battery Current (A): 70
Peak Efficiency: 98%
Max. PV Open Circuit Voltage (V): 150 maximum coldest condition. 145 start-up and operation maximum.
Remote Temp. Compensation: No
IP Rating IP43 (electronic components), IP22 (connection area)
Dimensions TR models (mm) L x W x H 185 x 250 x 95: MC4 models (mm) L x W x H 215 x 250 x 95
Weight (Kg) 3
Delivery time 3-5 days on all orders
Introducing the Intelligent 50A MPPT solar charge controller - the perfect solution for optimizing your solar power system's efficiency. This highly efficient charge controller is designed to work with solar panels up to 700W (12V battery system) and 1400W (24V battery system) and up to 100V.
The Intelligent 50A MPPT solar charge controller is equipped with advanced connectivity options, including RS-485 communication, Ethernet, and Wi-Fi, allowing you to monitor your solar power system remotely using your smartphone or computer. The controller also features a large LCD display that provides real-time monitoring of your solar system's performance, including battery voltage, charging current, and power output.
With its advanced Maximum Power Point Tracking (MPPT) algorithm, this charge controller ensures that your solar panels are always operating at their maximum efficiency, maximizing the energy output of your solar system. The Intelligent 50A MPPT solar charge controller is also equipped with a range of protection features, including overvoltage protection, overcurrent protection, short circuit protection, and reverse polarity protection, ensuring that your solar system is protected from damage due to electrical faults or system malfunctions.
The Intelligent 50A MPPT solar charge controller comes with a 5-year warranty, providing you with peace of mind and ensuring that your investment is protected. With its advanced features, efficient performance, and reliable protection, the Intelligent 50A MPPT solar charge controller is the ideal choice for powering your solar power system. Invest in the best and enjoy the benefits of clean, renewable energy today!
Meet the Intelligent 35A MPPT solar charge controller - the perfect choice for enhancing the performance of your solar power system. This highly efficient charge controller is designed to work with solar panels up to 500W (12V battery system), 1000W (24V battery system), 1500W (36V battery system), and 2000W (48V battery system) and up to 150V.
The Intelligent 35A MPPT solar charge controller is equipped with advanced connectivity options, including RS-485 communication, Ethernet, and Wi-Fi, allowing you to monitor your solar power system remotely using your smartphone or computer. The controller also features a large LCD display that provides real-time monitoring of your solar system's performance, including battery voltage, charging current, and power output.
With its advanced Maximum Power Point Tracking (MPPT) algorithm, this charge controller ensures that your solar panels are always operating at their maximum efficiency, maximizing the energy output of your solar system. The Intelligent 35A MPPT solar charge controller is also equipped with a range of protection features, including overvoltage protection, overcurrent protection, short circuit protection, and reverse polarity protection, ensuring that your solar system is protected from damage due to electrical faults or system malfunctions.
The Intelligent 35A MPPT solar charge controller comes with a 5-year warranty, providing you with peace of mind and ensuring that your investment is protected. With its advanced features, efficient performance, and reliable protection, the Intelligent 35A MPPT solar charge controller is the ideal choice for powering your solar power system. Invest in the best and enjoy the benefits of clean, renewable energy today!
Introducing the Intelligent 45A MPPT solar charge controller/regulator, the perfect solution for optimizing the performance of your solar panels. Designed to accommodate solar panels up to 650W for a 12V battery system, 1300W for a 24V battery system, 1950W for a 36V battery system, and 2600W for a 48V battery system, this charge controller is the ultimate choice for your solar power needs.
With advanced connectivity options, the Intelligent 45A MPPT solar charge controller/regulator allows you to easily monitor and control your solar power system. The large LCD display provides real-time monitoring of system voltage, current, and power, and the user-friendly interface allows for easy configuration and customization.
The Maximum Power Point Tracking (MPPT) technology ensures that your solar panels are always operating at their maximum efficiency, which means you can generate more power and reduce your energy costs. This charge controller/regulator also features multiple protection functions such as overcharge, over-discharge, short-circuit, and reverse polarity protection, ensuring your solar power system is always safe and secure.
With a 5-year warranty, you can trust that the Intelligent 45A MPPT solar charge controller/regulator will provide reliable and efficient performance for years to come. So, whether you're looking to power your home, RV, boat, or any other off-grid application, the Intelligent 45A MPPT solar charge controller/regulator is the ideal choice for all your solar power needs.
Introducing the Intelligent 60A MPPT solar charge controller - the ultimate solution for harnessing the power of solar energy. This highly efficient charge controller is designed to work with solar panels up to 860W (12V battery system), 1720W (24V battery system), 2580W (36V battery system), and 3440W (48V battery system), and up to 150V.
The Intelligent 60A MPPT solar charge controller is equipped with advanced connectivity options, including RS-485 communication, Ethernet, and Wi-Fi, enabling you to monitor your solar power system remotely using your smartphone or computer. The controller also features a large LCD display that provides real-time monitoring of your solar system's performance, including battery voltage, charging current, and power output.
With its advanced Maximum Power Point Tracking (MPPT) algorithm, this charge controller ensures that your solar panels are always operating at their maximum efficiency, maximizing the energy output of your solar system. The Intelligent 60A MPPT solar charge controller is also equipped with a range of protection features, including overvoltage protection, overcurrent protection, short circuit protection, and reverse polarity protection, ensuring that your solar system is protected from damage due to electrical faults or system malfunctions.
The Intelligent 60A MPPT solar charge controller comes with a 5-year warranty, providing you with peace of mind and ensuring that your investment is protected. With its advanced features, efficient performance, and reliable protection, the Intelligent 60A MPPT solar charge controller is the ideal choice for powering your solar power system. Invest in the best and enjoy the benefits of clean, renewable energy today!
Victron EasyPlus 12v 1600w inverter charger:
The Victron EasyPlus is a multifunctional energy system consisting of a powerful sine wave inverter, a sophisticated battery charger, a high speed AC transfer switch and AC distribution in a single light weight and compact enclosure. The system has been designed for those who want to enjoy the comfort and freedom of a complete energy system without spending time on the installation of separate components and difficult technical procedures.
The Victron EasyPlus guarantees uninterrupted power supply, whenever and wherever you are. Where shore or generator power is limited, the unique PowerAssist technology makes it possible to boost the total capacity by adding extra energy from the batteries. Optimum safety is guaranteed with the integrated RCD (Residual Current Device) protecting against earth leakage.
The Victron EasyPlus is connected to the batteries and to the shore power or generator. The maximum available generator or shore current is set using the dial on the control panel. The power consumers are divided into two groups. The first group consists of the ‘regular’, low or short term power users such as sockets or kitchen equipment. This group can be fed from both shore/generator and battery power via the inverter. The second group is the ‘heavy user’ circuit. This can be a water heater or the air-conditioning. In order to protect the batteries from excessive discharge, this group is shore/generator-only and cannot be supplied when the inverter is functioning. Unique PowerAssist technology protects the shore or generator from being overloaded by adding extra inverter power when needed.
Technical information:
12 Volt 1600 VA sine wave inverter (3000 Watt peak power).
70 A charger incl. 4 A trickle charge for start battery.
Unique PowerAssist technology protects the shore or generator from being overloaded by adding extra inverter power when needed.
4 Stage adaptive charge technology for quick and accurate battery charging.
The AC distribution consists of a RCD (30mA/16A) and four AC outputs protected by two 10 A and two 16 A circuit breakers.
One 16 A output is controlled by the AC input: it will switch on only when AC is available.
RCD (30 mA/16 A) on AC output.
No-break system: uninterrupted switching between shore/generator and inverter.
Battery cables included. 24 Month worldwide warranty.
Dimensions – Height : 510 mm Width : 214 mm Depth : 110 mm Weight : 11,7 Kg
Victron EasySolar 12V and 24V, 1600VA
The all-in-one solar power solution
The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.
The solar charge controller: Blue Solar MPPT 100/50
Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.
The inverter/charger: MultiPlus Compact 12/1600/70
The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.
AC distribution
The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available.
PowerAssist
Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.
EasySolar
EasySolar 12/1600/70
EasySolar 24/1600/40
Part Number
CEP121621000
CEP241621010
Transfer switch
16A
16A
Input voltage range
9,5 – 17V
19 – 33V
Charge current house battery (4)
70A
40A
Model
MPPT 100/50
MPPT 100/50
Weight
15kg
15kg
Dimensions (hxwxd)
745 x 214 x 110mm
745 x 214 x 110mm
Victron EasySolar, an all-in-one solar power solution. These combine an MPPT solar charge controller, an inverter/charger and AC breakers for distribution all in one enclosure. Easy to install with minimal wiring.
Ideal for small off-grid systems with loads such as lighting, computers, chargers, electronic appliances and small power appliances.
Features
Up to three strings of PV can be connected to the three sets of MC4 connectors
The MultiPlus Compact and MPPT charge controller share the battery cables for power. The batteries can be charged by solar power via a MPPT charge controller and/or AC power through the inverter/charger from either the grid or a generator
AC Distribution, distribution consists of an RCD and four AC outputs which are protected by two 10A and two 16A breakers. One 16A output is controlled by the AC input, it will only switch on when the grid/genset is available
Power assist protects the utility grid or generator supply from being overloaded by adding extra inverter power when required
Several software programs are available to configure the system from a grid interactive system or a stand-alone applications. Please follow the link for more information: https://www.victronenergy.nl/support-and-downloads/software
Voltage:
12
Brand:
Victron Energy
Cont. output power at 25°C (VA):
1600VA
Peak power (W):
3000W
Transfer Switch (A):
16A
Charge current house battery (A):
70A
Efficiency :
98%
Dimensions:
H745 x W214 x D110mm
IP (Ingress Protection) rating: :
IP21
Output Voltage:
230V
Warranty:
5 Years
Victron EasySolar, an all-in-one solar power solution. These combine an MPPT solar charge controller, an inverter/charger and AC breakers for distribution all in one enclosure. Easy to install with minimal wiring.
Ideal for small off-grid systems with loads such as lighting, computers, chargers, electronic appliances and small power appliances.
Features
Up to three strings of PV can be connected to the three sets of MC4 connectors
The MultiPlus Compact and MPPT charge controller share the battery cables for power. The batteries can be charged by solar power via a MPPT charge controller and/or AC power through the inverter/charger from either the grid or a generator
AC Distribution, distribution consists of an RCD and four AC outputs which are protected by two 10A and two 16A breakers. One 16A output is controlled by the AC input, it will only switch on when the grid/genset is available
Power assist protects the utility grid or generator supply from being overloaded by adding extra inverter power when required
Several software programs are available to configure the system from a grid interactive system or a stand-alone applications. Please follow the link for more information: https://www.victronenergy.nl/support-and-downloads/software
5 years warranty
Victron EasySolar 48V, 5000VA Color Control
The all-in-one solar power solution
The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.
Color Control panel
Two outstanding functions: – Prioritizes battery charging by the MPPT charge controller – Connects to the internet, enabling remote monitoring (VRM website) and remote control.
AC distribution
The AC distribution consists of a RCD (30mA / 63A) and four AC outputs protected by two 10A and two 16A circuit breakers. An additional 16A output is controlled by the AC input: it will switch on only when AC is available.
PowerAssist
Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.
Victron EasySolar, an all-in-one solar power solution. These combine an MPPT solar charge controller, an inverter/charger and AC breakers for distribution all in one enclosure. Easy to install with minimal wiring.
Ideal for small off-grid systems with loads such as lighting, computers, chargers, electronic appliances and small power appliances.
Features
Up to three strings of PV can be connected to the three sets of MC4 connectors
The MultiPlus Compact and MPPT charge controller share the battery cables for power. The batteries can be charged by solar power via a MPPT charge controller and/or AC power through the inverter/charger from either the grid or a generator
AC Distribution, distribution consists of an RCD and four AC outputs which are protected by two 10A and two 16A breakers. One 16A output is controlled by the AC input, it will only switch on when the grid/genset is available
Power assist protects the utility grid or generator supply from being overloaded by adding extra inverter power when required
Several software programs are available to configure the system from a grid interactive system or a stand-alone applications. Please follow the link for more information: https://www.victronenergy.nl/support-and-downloads/software
5 years warranty
Brand:
Victron Energy
Voltage:
48V
Transfer Switch (A):
50
Cont. output power at 25°C (VA):
5000
Peak power (W):
9000
Efficiency :
96%
Dimensions:
H604 x W323 x D253mm
Weight (kg):
38.6Kg
IP (Ingress Protection) rating: :
IP 21
Output Voltage:
230V
Warranty:
Victron EasySolar, an all-in-one solar power solution. These combine an MPPT solar charge controller, an inverter/charger and AC breakers for distribution all in one enclosure. Easy to install with minimal wiring.
Ideal for small off-grid systems with loads such as lighting, computers, chargers, electronic appliances and small power appliances.
Features
Up to three strings of PV can be connected to the three sets of MC4 connectors
The MultiPlus Compact and MPPT charge controller share the battery cables for power. The batteries can be charged by solar power via a MPPT charge controller and/or AC power through the inverter/charger from either the grid or a generator
AC Distribution, distribution consists of an RCD and four AC outputs which are protected by two 10A and two 16A breakers. One 16A output is controlled by the AC input, it will only switch on when the grid/genset is available
Power assist protects the utility grid or generator supply from being overloaded by adding extra inverter power when required
Several software programs are available to configure the system from a grid interactive system or a stand-alone applications. Please follow the link for more information: https://www.victronenergy.nl/support-and-downloads/software
5 years warranty
Victron EasySolar-II 24V 3kVa MPPT 250/70 GX
The all-in-one solar power solution
The Victron EasySolar-II GX integrates the following elements:
• A MultiPlus-II inverter/charger
• A SmartSolar MPPT-Tr solar charge controller
• A GX device with a 2 x 16-character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
Display and Wi-Fi
The display reads battery, inverter and solar charge controller parameters.
The same parameters can be accessed with a smartphone or other Wi-Fi enabled device.
In addition, Wi-Fi can be used to set up the system and to change settings.
Solar charge controller
The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger.
The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.
GX device
The integrated GX device includes:
• A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port.
• A USB port
• An Ethernet port
• A VE.Direct port
The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.
Victron EasySolar-II 24V/48V 3kVa MPPT 250/70 GX
The all-in-one solar power solution
The Victron EasySolar-II GX integrates the following elements:
• A MultiPlus-II inverter/charger
• A SmartSolar MPPT-Tr solar charge controller
• A GX device with a 2 x 16-character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
Display and Wi-Fi
The display reads battery, inverter and solar charge controller parameters.
The same parameters can be accessed with a smartphone or other Wi-Fi enabled device.
In addition, Wi-Fi can be used to set up the system and to change settings.
Solar charge controller
The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger.
The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.
GX device
The integrated GX device includes:
• A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port.
• A USB port
• An Ethernet port
• A VE.Direct port
The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.
Please note: This inverter has a 12-16 week lead time for stock.
The Victron EasySolar II 48/5000/70-50 MPPT 250/100 GX is an all-in-one power solution designed for use in a wide range of off-grid and backup power applications. This advanced system combines a powerful inverter, a high-performance MPPT solar charge controller, and a sophisticated battery management system into a single, easy-to-use package.
With a continuous output of 5,000 watts and a 48V DC input, the EasySolar II is capable of delivering reliable power to even the most demanding loads. Its advanced MPPT charge controller can handle up to 250 volts of solar input, ensuring that you get the maximum power from your solar panels.
The EasySolar II also features a built-in GX communication module, which provides remote monitoring and control capabilities via the Victron Remote Management (VRM) portal. This makes it easy to keep an eye on your system's performance and make adjustments as needed.
The system includes a sophisticated battery management system that ensures your batteries are charged and maintained in the most efficient way possible. It also includes a built-in transfer switch that can automatically switch between grid power and battery power in the event of an outage, ensuring that your critical systems stay up and running.
With its compact size and easy-to-use interface, the EasySolar II is the perfect choice for anyone looking for a reliable and powerful all-in-one power solution.
Key Features:
All-in-one power solution
Advanced MPPT solar charge controller
Built-in GX communication module for remote monitoring and control
Sophisticated battery management system
Built-in transfer switch for seamless switching between grid and battery power
Compact size and easy-to-use interface
Specifications:
Continuous power output: 5,000 watts
Input voltage: 48V DC
Solar charge controller: 250 volts / 70 amps
AC output: 230V / 50Hz
Battery charger: 70 amps
Battery capacity: Up to 2000 Ah
Dimensions: 630 x 470 x 270 mm
Weight: 50 kg
