Please note! EV charger is delivered without a cable. To connect the EV charger to an electric vehicle, a 5 meter or 7,5 meter cable must be ordered. Shipping: 4-5 working days The Future Net version of FIMER FLEXA AC Station includes great connectivity features. Thanks to a 3G/4G connection, the station can communicate via an OCPP protocol with a centralized management system, which allows the remote management of parameters, accesses, payments and errors. It offers the following additional features compared to the Stand Alone version: Intelligent remote monitoring and control system. Thanks to the use of a mobile application for the user and a centralized system for the operator, it allows remote monitoring of the device status, the creation of use and energy reports, access management and error analysis. 4.3” TFT display, providing multiple local operating indications. OCPP 1.5 or 1.6 Json communication protocol Brand FIMER Manufacturer FIMER Country of manufacture Italy System FIMER Flexa Type EV Socket Socket Number of sockets 2 Cable option Cable excluded EV cable Type 2 More Information Number of phases 1 phase, 3 phase Charge power 22 kW Communication WiFi, Ethernet, Cellular Features Load Balancing Degree of protection (IP) IP54 Suitable for outdoor mounting Yes Height (mm) 1315 Width (mm) 437 Depth (mm) 293 Weight (kg) 48 The following conditions apply to delivery on location : The unloading location must be accessible to lorries of up to 15 meters in length, 3 meters in width and 4.5 meters clearance height; delivery times are between 8:00 AM and 5:00 PM; the recipient must be present when the goods are received; the standard situation is that the transporter has no unloading equipment. If the shipment must be delivered with a tail lift you have to select this option. Shipments longer than 3 meters can not be unloaded with a tail lift; when you selected the option tail lift, the goods are unloaded directly next to the lorry. Failure to meet these conditions may result in additional costs being charged. In the event of any non-conformities, please feel free to contact our customer service

Read more less

FIMER FLEXA AC Wallbox is available in a Cord version, equipped with a T2 Cord, or in a Socket version, equipped with a T2 or a T3A socket. The device can be installed on the wall or on a dedicated FIMER FLEXA Stand and is available in different configurations, depending on the power (from 3.7kW to 22kW), the connection type (T2 Cord or T2 socket or T3A socket), and the type of connectivity (Stand Alone, Inverter Net or Future Net). Each FIMER FLEXA AC Wallbox can be configured in Master (Future Net) or Slave (Stand Alone or Inverter Net) mode: this configuration makes multiple installations (in public and company car parking facilities) even more efficient, through a built-in Load Management system. FIMER FLEXA AC Wallbox - Future Net The Future Net version includes great connectivity features that enable remote monitoring and control of the device. It offers the following features in addition to those of the Stand Alone version: 3G/4G connectivity, Wi-Fi, Ethernet OCPP 1.6 Json communication protocol Intelligent remote monitoring and control system: thanks to the use of a mobile application for the user and a centralized system for the operator, it allows remote monitoring of the device status, the creation of use and energy reports, access management and error analysis Master/Slave Management Brand FIMER Manufacturer FIMER Country of manufacture Italy System FIMER Flexa Type EV Socket Cable Cable option Cable included EV cable Type 2 Number of phases 3 phase More Information Charge power 22 kW Communication WiFi, Ethernet, Cellular Features Load Balancing Degree of protection (IP) IP55 Suitable for outdoor mounting Yes WiFi Yes Ethernet Yes Height (mm) 275 Width (mm) 480 Depth (mm) 140 Weight (kg) 8.5

Read more less

Fimer Flexa AC Wallbox is available in a Cord version, equipped with a T2 Cord, or in a Socket version, equipped with a T2 or a T3A socket. The device can be installed on the wall or on a dedicated Fimer Flexa Stand and is available in different configurations, depending on the power (from 3.7kW to 22kW), the connection type (T2 Cord or T2 socket or T3A socket), and the type of connectivity (Stand Alone, Inverter Net or Future Net). Each Fimer Flexa AC Wallbox can be configured in Master (Future Net) or Slave (Stand Alone or Inverter Net) mode: this configuration makes multiple installations (in public and company car parking facilities) even more efficient, through a built-in Load Management system. Fimer Flexa AC Wallbox - Stand Alone The Stand Alone version comes with basic features that guarantee easy use at an affordable price. Its functionalities are limited to interaction with the electric vehicle, activating its charging process and ensuring its safe operation: Status signaling via local LEDs and local RS485 communication for configuration and monitoring Available in Cord (T2) or Socket (T2 or T3A) versions Communication interface with MID counter or TA meter Bluetooth communication and RFiD reader for local access management Brand FIMER Manufacturer FIMER Country of manufacture Italy System FIMER Flexa Type EV Socket Cable Cable option Cable excluded EV cable Type 2 Number of phases 3 phase More Information Charge power 11 kW Communication Bluetooth Features RFID, Load Balancing Degree of protection (IP) IP55 Suitable for outdoor mounting Yes Ethernet Yes Height (mm) 275 Width (mm) 480 Depth (mm) 140 Weight (kg) 8.5

Read more less

FIMER FLEXA AC Wallbox is available in a Cord version, equipped with a T2 Cord, or in a Socket version, equipped with a T2 or a T3A socket. The device can be installed on the wall or on a dedicated FIMER FLEXA Stand and is available in different configurations, depending on the power (from 3.7kW to 22kW), the connection type (T2 Cord or T2 socket or T3A socket), and the type of connectivity (Stand Alone, Inverter Net or Future Net). Each FIMER FLEXA AC Wallbox can be configured in Master (Future Net) or Slave (Stand Alone or Inverter Net) mode: this configuration makes multiple installations (in public and company car parking facilities) even more efficient, through a built-in Load Management system. FIMER FLEXA AC Wallbox - Stand Alone The Stand Alone version comes with basic features that guarantee easy use at an affordable price. Its functionalities are limited to interaction with the electric vehicle, activating its charging process and ensuring its safe operation: Status signaling via local LEDs and local RS485 communication for configuration and monitoring Available in Cord (T2) or Socket (T2 or T3A) versions Communication interface with MID counter or TA meter Bluetooth communication and RFiD reader for local access management Brand FIMER Manufacturer FIMER Country of manufacture Italy System FIMER Flexa Type EV Socket Cable Cable option Cable included EV cable Type 2 Number of phases 1 phase More Information Charge power 7 - 7,4 kW Communication Bluetooth Features Load Balancing Degree of protection (IP) IP55 Suitable for outdoor mounting Yes Ethernet Yes Height (mm) 275 Width (mm) 480 Depth (mm) 140 Weight (kg) 8.5

Read more less

FIMER FLEXA AC Wallbox is available in a Cord version, equipped with a T2 Cord, or in a Socket version, equipped with a T2 or a T3A socket. The device can be installed on the wall or on a dedicated FIMER FLEXA Stand and is available in different configurations, depending on the power (from 3.7kW to 22kW), the connection type (T2 Cord or T2 socket or T3A socket), and the type of connectivity (Stand Alone, Inverter Net or Future Net). Each FIMER FLEXA AC Wallbox can be configured in Master (Future Net) or Slave (Stand Alone or Inverter Net) mode: this configuration makes multiple installations (in public and company car parking facilities) even more efficient, through a built-in Load Management system. FIMER FLEXA AC Wallbox - Future Net The Future Net version includes great connectivity features that enable remote monitoring and control of the device. It offers the following features in addition to those of the Stand Alone version: 3G/4G connectivity, Wi-Fi, Ethernet OCPP 1.6 Json communication protocol Intelligent remote monitoring and control system: thanks to the use of a mobile application for the user and a centralized system for the operator, it allows remote monitoring of the device status, the creation of use and energy reports, access management and error analysis Master/Slave Management Brand FIMER Manufacturer FIMER Country of manufacture Italy System FIMER Flexa Type EV Socket Socket Number of sockets 1 Cable option Cable excluded EV cable Type 2 Number of phases 3 phase More Information Charge power 22 kW Communication WiFi, Ethernet, Cellular Features Load Balancing Degree of protection (IP) IP55 Suitable for outdoor mounting Yes WiFi Yes Ethernet Yes Height (mm) 275 Width (mm) 480 Depth (mm) 140 Weight (kg) 7

Read more less

Fimer Flexa AC Wallbox is available in a Cord version, equipped with a T2 Cord, or in a Socket version, equipped with a T2 or a T3A socket. The device can be installed on the wall or on a dedicated Fimer Flexa Stand and is available in different configurations, depending on the power (from 3.7kW to 22kW), the connection type (T2 Cord or T2 socket or T3A socket), and the type of connectivity (Stand Alone, Inverter Net or Future Net). Each Fimer Flexa AC Wallbox can be configured in Master (Future Net) or Slave (Stand Alone or Inverter Net) mode: this configuration makes multiple installations (in public and company car parking facilities) even more efficient, through a built-in Load Management system. Fimer Flexa AC Wallbox - Stand Alone The Stand Alone version comes with basic features that guarantee easy use at an affordable price. Its functionalities are limited to interaction with the electric vehicle, activating its charging process and ensuring its safe operation: Status signaling via local LEDs and local RS485 communication for configuration and monitoring Available in Cord (T2) or Socket (T2 or T3A) versions Communication interface with MID counter or TA meter Bluetooth communication and RFiD reader for local access management Brand FIMER Manufacturer FIMER Country of manufacture Italy System FIMER Flexa Type EV Socket Socket Number of sockets 1 Cable option Cable excluded EV cable Type 2 More Information Number of phases 3 phase Charge power 11 kW Communication Bluetooth Features RFID, Load Balancing Degree of protection (IP) IP55 Suitable for outdoor mounting Yes Ethernet Yes Height (mm) 275 Width (mm) 480 Depth (mm) 140 Weight (kg) 7

Read more less

FIMER FLEXA AC Wallbox is available in a Cord version, equipped with a T2 Cord, or in a Socket version, equipped with a T2 or a T3A socket. The device can be installed on the wall or on a dedicated FIMER FLEXA Stand and is available in different configurations, depending on the power (from 3.7kW to 22kW), the connection type (T2 Cord or T2 socket or T3A socket), and the type of connectivity (Stand Alone, Inverter Net or Future Net). Each FIMER FLEXA AC Wallbox can be configured in Master (Future Net) or Slave (Stand Alone or Inverter Net) mode: this configuration makes multiple installations (in public and company car parking facilities) even more efficient, through a built-in Load Management system. FIMER FLEXA AC Wallbox - Stand Alone The Stand Alone version comes with basic features that guarantee easy use at an affordable price. Its functionalities are limited to interaction with the electric vehicle, activating its charging process and ensuring its safe operation: Status signaling via local LEDs and local RS485 communication for configuration and monitoring Available in Cord (T2) or Socket (T2 or T3A) versions Communication interface with MID counter or TA meter Bluetooth communication and RFiD reader for local access management Brand FIMER Manufacturer FIMER Country of manufacture Italy System FIMER Flexa Type EV Socket Socket Number of sockets 1 Cable option Cable excluded EV cable Type 2 More Information Number of phases 1 phase Charge power 7 - 7,4 kW Communication Bluetooth Features Load Balancing Degree of protection (IP) IP55 Suitable for outdoor mounting Yes Ethernet Yes Height (mm) 275 Width (mm) 480 Depth (mm) 140 Weight (kg) 7

Read more less

The UNO-DM-TL-PLUS-Q single-phase inverter family, with power ratings from 1.2 to 6.0 kW, is the optimal solution for residential installations. All power ratings share the same overall volume, allowing higher performance in a minimum space,and are available with single or dual MPPT. Easy to install, fast to commission The presence of Plug and Play connectors, both on the DC and AC side, as well as the wireless communication, enable a simple, fast and safe installation without the need of opening the front cover of the inverter. The featured easy commissioning routine removes the need for a long configuration process, resulting in lower installation time and costs. Smart capabilities The embedded logging capabilities and direct transferring of the data to Internet (via Ethernet or WLAN) allow customers to enjoy the whole Aurora Vision® remote monitoring experience. Energy Viewer This tool allows residential customers to remotely monitor the performance of their own solar plant and provides all information necessary to increase energy self-reliance and self-sufficiency. Highlights - Wireless access to the embedded Web User Interface - Easy commissioning capability - Future-proof with embedded connectivity for smart building and smart grid integration - Dynamic feed-in control (including zero injection) - Remote firmware upgrade for inverter and components Brand FIMER Manufacturer FIMER Country of manufacture Italy Warranty in Years 10 HS-code 85044085 EAN-code 8054529635443 Inverter type String Number of phases 1 phase Max. DC- input capacity (W) 3750 AC-nominal output power 3000 More Information Number of MPPT 2 Degree of protection (IP) IP65 Suitable for outdoor mounting Yes DC Switch Yes Arc-fault circuit interrupter (AFCI) No Transformer No Data logging Yes Display No WiFi Yes Ethernet Yes

Read more less

The UNO-DM-TL-PLUS-Q single-phase inverter family, with power ratings from 3.3 to 5.0 kW, is the optimal solution for residential installations. All power ratings share the same overall volume,allowing higher performance in a minimum space, and feature dual Maximum Power Point Trackers. Easy to install, fast to commission The presence of Plug and Play connectors, both on the DC and AC side, as well as the wireless communication, enable a simple, fast and safe installation without the need of opening the front cover of the inverter. The featured easy commissioning routine removes the need for a long configuration process, resulting in lower installation time and costs. Smart capabilities The embedded logging capabilities and direct transferring of the data to Internet (via Ethernet or WLAN) allow customers to enjoy the whole Aurora Vision® remote monitoring experience. Energy Viewer This tool allows residential customers to remotely monitor the performance of their own solar plant and provides all information necessary to increase energy self-reliance and self-sufficiency. Highlights Wireless access to the embedded Web User Interface Easy commissioning capability Future-proof with embedded connectivity for smart building and smart grid integration Dynamic feed-in control (including zero injection) Remote firmware upgrade for inverter and components Thanks to our new 10-year extended warranty program for the UNO-DM-PLUS-Q family across Europe, you can finally relax and enjoy your PV system even more. SKU 3P22990S100F Brand FIMER Manufacturer FIMER Country of manufacture Italy Warranty in Years 10 HS-code 85044085 Inverter type String Number of phases 1 phase Max. DC- input capacity (W) 4250 AC-nominal output power 4000 Number of MPPT 2 More Information Degree of protection (IP) IP65 Suitable for outdoor mounting Yes DC Switch Yes Arc-fault circuit interrupter (AFCI) No WiFi Yes Ethernet Yes Width (mm) 418 Height (mm) 553 Depth (mm) 175 Weight (kg) 15

Read more less