The Renogy 100W Solar Power Starter Kit is perfect for new customers wanting to get a start in solar. The Starter Kit is great for off-grid applications; such as RVs; trailers; boats; sheds; and cabins — providing many benefits; including; but not limited to; quiet power production and grid independence. Adding a monocrystalline solar panel kit can extend your travels further then ever before. This solar kit comes with the tools necessary for a new system: one Renogy 100W 12V Mono Solar Panels; one 30A PWM Wanderer Charge Controller; one 20ft 10AWG Solar Adaptor Kit; one 8ft 10AWG Tray Cable; and one set of Z-brackets. Start your solar adventure with a Renogy Starter Kit. KEY FEATURES Efficient ● High solar cell efficiency : Monocrystalline 18.4% ● Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments Reliable ● EL tested solar modules; no hot-spot heating guaranteed ● Corrosion-resistant aluminum frame for extended outdoor use; allowing the panels to last for decades ● TPT back sheet ensures smooth performance over a long period of time ● IP65 rated junction box provides complete protection against environmental particles and low pressure water jets Intuitive ● Sealed; Gel and Flooded charging algorithim ready ● 4-Stage battery charging process for a rapid; efficient; and safe battery charging Safe ● The Renogy Wanderer is equipped with multiple electronic protections; overcharging; overload; short-circuit and reversed polarity ● Pre-drilled holes on the back of the panel allow for fast and secure mounting Expandable ● With the Renogy Wanderer 30A PWM Charge Controller; you can expand your system up to a maximum of 400W SPECIFICATION RENOGY 100W MONOCRYSTALLINE SOLAR PANEL THE RENOGY WANDERER - 30A PWM NEGATIVE-GROUND CHARGE CONTROLLER Maximum Power: 100W Norminal Voltage: 12VDC Maximum System Voltage:600V DC (UL) Rated Charge Current: 30A Open-Circuit Voltage (Voc): 21.6V Max. PV Input Voltage: 25 VDC Short-Circuit Current (Isc): 6.24A Max. PV Input Power: 400W (12V) Optimum Operating Voltage (Vmp): 17.9V Optimum Operating Current (Imp): 5.72A Weight: 14.3lbs(6.5kg) Dimensions: 42.2 X 19.6 X 1.38 in(1074x498x35mm) RENOGY 8FT 10AWG TRAY CABLES (A PAIR) MOUNTING Z BRACKETS (SET) Length: 8ft Eight Long Cap Bolts and Four Short Bolts AWG: 10 Four Spring Washers and Four Washers Rating Voltage: 600/1000V Four Z Shape Solar Panel Brackets Temperature: -40°F to +185°F Four Nuts RENOGY ADAPTOR KIT (SET) Length: 20ft AWG: 10 Rating Voltage: 600/1000V Temperature: -40°F to +185°F WARRANTY INFORMATION Panels 25-year transferable power output warranty: 5 year/95% efficiency rate; 10 year/90% efficiency rate; 25-year/80% efficiency rate 5-year material and workmanship warranty Accessories 1-year material warranty

Read more less

The perfect addition to any off-grid system, whether for a van or a cabin, the Renogy 1000W Pure Sine Wave Power Inverter acts as a DC to AC converter that allows you to power your household appliances. Unlike modified sine wave inverters, this 1000W inverter is a pure sine wave, capable of producing cleaner, smoother, and more reliable electricity to operate tools, fans, lights, and other electronics without interference. Many off-grid systems require a 12V solar inverter to power everyday electronics and this one includes multiple protections to help things run smoothly and safely. The AC priority switch function enables the inverter automatically switch from the battery (DC) to the mains (AC) and vice versa whenever the utility company takes/loses power!

Read more less

State-of-the-art battery cells ensure a lifespan of more than 2000 cycles, 100A continuous discharge current, and a wide operating temperature range. Upgrades to lithium seamlessly with the standard BCI group size but a greater energy density, a deeper discharge capability, a higher round-trip efficiency, and a faster charging speed. The state-of-the-art battery management system (BMS) with high-performance dual-processors provides short circuit, over charging and over-temperature protection while maintaining a balanced voltage across all cells. The lithium battery has low temperature charging and discharging protection function. When the temperature is below 0℃, it will stop charging. When the temperature is below -20℃, it will stop discharging. Easily connect multiple batteries in parallel with the auto-balancing function, improving the average charging efficiency for your batteries in the long term. Monitors the battery operation status on mobile devices in real time with the built-in Bluetooth module. RENOGY 12V 100AH SMART LITHIUM IRON PHOSPHATE BATTERY Operation Specifications Mechanical Specifications Rated Capacity 100 Ah Dimensions 12.99 x6.77 x 8.43 inch / 330 x 172 x 214mm Nominal Voltage 12.8 V Weight 28.7 lbs. / 13.0 kg Voltage Range 10~14.8 V Charge Temperature 32~131°F/ 0~55°C Cycle Life(0.5C,25℃) 80%DOD 2000 Cycles Discharge Temperature -4~140°F/ -20~60°C Maximum Continuous Charging Current 50 A Protection Rate IP65 Maximum Continuous Discharging Current 100 A Communication Port Modbus Standard Operation Temperature 25℃±5℃ Certifications Storage Temperature -13~149℉ / -25~65℃ UN38.3 YES Connection Method Parallel(Up to 8) MSDS YES FCC YES Accessories Warranty M8 Bolts x 2 5-year Prorated Warranty

Read more less

The Renogy Smart Lithium Iron Phosphate Battery enables auto-balance among parallel-connections and provides more flexibility for battery connection. The integrated smart battery management system (BMS) not only protects this 12V 100Ah LiFePO4 battery from various abnormal conditions but monitors and manages the charging/discharging process. The state-of-the-art battery cells ensure a long cycle life and exceptional discharge performance. If you’re searching for a deep cycle battery for caravan, cabin, or marine use, then this lightweight, auto-balanced, ultra-safe, long-cycle-life lithium-ion battery is the perfect plug-and-play solution for you! The Renogy Adventurer Li and Rover charge controller are fully compatible with this battery. note that the new Renogy BT-2 Bluetooth module with RJ45 port is compatible with this smart Li battery. Renogy BT-2 bluetooth module When connecting the batteries in parallel, a communication cable is not needed to enable the auto-balancing function. When the battery voltage drops to 0V, please reactivate the battery using an external charging device that has the lithium battery activation function. Make sure to tighten the battery terminals securely and use appropriate size wiring. Failure to make a secure connection could result in overheating and battery damage. DO NOT string the battery in series. It is made ONLY for 12V parallel connections using the batteries of the same manufacturer and model. Please avoid too high a voltage difference between paralleled batteries, despite the auto-balancing function, to avoid triggering the over-current protection. Auto-Balance Connects multiple batteries in parallel safely without internal state non-uniformity issues. Ultra-Safety The battery management system (BMS) provides comprehensive protection to the battery and manages the charging/discharging process wisely. Uncompromised Quality State-of-the-art battery cells ensure a lifespan of more than 4000 cycles, 100A continuous discharge current, and a wide range of operation temperature. Communication Port The RJ45 communication ports enable data transmission to meet the needs of different usage scenarios. SPECIFICATION SPECIFICATIONS Rated Capacity: 100Ah Insulation Resistance: 500V DC, ≥ 10 MΩ Operating Charge Temperature: 32~131°F/ 0~55°C Maximum Continuous Charging Current: 50 A Operating Discharge Temperature: -4~140°F/ -20~60°C Maximum Continuous Discharging Current: 100 A Voltage Range: 10~14.8 V Communication Port: RJ45 (RS485 Protocol) Nominal Voltage: 12.8V Storage Temperature: -13~149°F/ -25~65°C Connection Method: Parallel Cycle Life: ≥4000 Cycles @ 80% DoD Dimensions:11.4 x 6.8 x 7.4 inch / 289 x 172 x 187.5 mm Weight: 26 lbs. / 11.8 kg Certifications: UN38.3, MSDS, UL1642, UKCA，PSE，FCC (Lithium Cell) Battery Terminal Bolts: M8x1x14mm Protection Rate: IP54 Additional Terminal Bolts: M8x1x20mm

Read more less

The Renogy 12V 170AH Lithium-Iron Phosphate Battery is perfect for deep-cycle applications including cabins, solar/wind energy systems, UPS battery backups, telecommunication systems, medical equipment, and more. Unlike gel or lead-acid batteries, the Renogy LFP battery is safer, lighter, and more powerful with a long service and shelf life to boot. Invest in this sealed, maintenance-free battery for your off-grid system today! Note: Please be aware that if the batteries' Battery Management System (BMS) is activated and the battery voltage shows 0V, you must use a compatible Li charger to reactivate our Li batteries. Make sure to tightly screw the battery terminals in, having loose battery terminals will cause the terminals to build up heat resulting in damage to the battery. Please be aware that the batteries' M12 terminals are thicker and will not work with any of our battery cable offerings, they require 1/2" ring terminals for proper connectivity. Custom Wires available upon request. DO NOT string this battery in series. It is made ONLY for parallel connections using identical batteries. SPECIFICATION ELECTRIC CHARACTERISTICS Nominal Voltage:12.8V Energy Density:149.1Wh/L Rated Capacity (0.2C):170Ah Internal Resistance:≤10mΩ Minimal Rated Capacity (0.2C):161.5Ah Cycle Life (0.2C, 20±5°C):80% DOD 2000 cycles Energy:2176Wh Specific Energy:103.6Wh/kg CHARGING PARAMETERS DISCHARGING PARAMETERS Charge Voltage:14.4 ± 0.2V Maximum Continuous Discharge Current:125A Maximum Charge Current:85A Discharge Cut-off Voltage:≥10V Charge Cut-off Voltage:14.6V TEMPERATURE PARAMETERS OPERATION TEMPERATURE RANGE TEMPERATURE PARAMETERS STORAGE TEMPERATURE RANGE Charge: 32~113℉ / 0～45℃ Less Than 1 Year: 32~77℉ / 0~25℃ Discharge: -4~140℉ / -20～60℃ Less Than 3 Months: 14~95℉ / -10~35℃ Recommended: 73.4 ± 9℉ / 23 ± 5℃ MECHANICAL PROPERTIES Length: 357mm / 14.0 inch Weight: 22 kg / 48.5 lbs. Width: 155mm / 6.1 inch Housing Material: ABS+PC Height: 270mm / 10.6 inch Terminal Model: M12x1.75x16mm Cell Model: IFR26650-3.4AH Assembly Method: 4S53P

Read more less

The Renogy Lithium Iron Phosphate Battery w/ Bluetooth is designed for the drop-in replacement of deep-cycle lead-acid batteries with its standard BCI group size. Weighing only half of the lead-acid counterparts, the battery can be safely discharged to 100% DOD (Depth of Discharge), delivering twice the energy. Manufactured with automotive grade battery cells, the battery features the highest safety standards and an extended cycle life. Hosting intelligent software, the advanced BMS (Battery Management System) provides comprehensive protection to the battery. The built-in Bluetooth module enables remote monitoring on mobile devices in real time. SPECIFICATION RENOGY 12V 200AH LITHIUM IRON PHOSPHATE BATTERY W/ BLUETOOTH Operation Specifications Mechanical Specifications Rated Capacity 200AH Dimensions 20.55 x 9.45 x 8.62 inch (522 x 240 x 219 mm) Nominal Voltage 12.8V Weight 60.2 lbs. (27.3 kg) Voltage Range 10~14.8 V Charge Temperature 32~131°F/ 0~55°C Cycle Life(0.2C,25℃) 80%DOD 2000 Cycles Discharge Temperature -4~140°F/ -20~60°C Maximum Continuous Charging Current 100 A Protection Rate IP65 Maximum Continuous Discharging Current 200 A Communication Protocol Modbus Standard Operation Temperature 25℃±5℃ Certifications Storage Temperature -13~149℉ / -25~65℃ UN38.3 YES Connection Method Parallel MSDS YES FCC YES Accessories PSE YES M8 Bolts x 2 UKCA YES CE YES Warranty RoHS YES 5-year Prorated Warranty Giteki YES

Read more less

Renogy's DC to DC MPPT on-board Battery Charger is designed to give you options! This multi-stage, multi-input battery charger can charge a service battery from a starting battery linked to an alternator or by utilizing solar panels connected directly to the unit. While your vehicle's alternator prioritizes your starting battery, this unit will allow your solar system to charge your service battery first! It's the smart way to keep yourself fully charged and off-grid longer! And with multi-stage charging and multi-chemistry functionality, Renogy's DC to DC MPPT Charger has you covered whether you're using Flooded, Gel, AGM, or Lithium batteries. With RJ45 communication port featured, you can unlock monitoring features exclusively using the BT-2 Bluetooth Module and Renogy DC Home App, control and monitor the device remotely through your phone in real time. SPECIFICATION SPECIFICATIONS System Voltage : 12VDC Battery Voltage Range : 9-16VDC Maximum Charging Current : 50A (25A Alternator / 25A PV) Battery Types : SLD/AGM, GEL, FLD, LISER Backup Battery Charging Mode : MPPT Charging Efficiency : Up to 97% Max. Solar Input Voltage : 25V Maximum Solar Input Power : 660W Alternator Input Voltage : Traditional Alternator: 13.2-16VDC Smart Alternator (Euro 6): 12-16VDC" Maximum Alternator Input Power : 660W Self-consumption : 60mA Operating Temperature Range : -31°F~149°F / -35°C~65°C Dimensions : 9.6 x 5.7 x 3.0 in / 244 x 146 x 77 mm Weight : 3.13 lbs / 1.42 kg OPTIONS: BT-2 BLUETOOTH MODULE Communication Protocol: RS485 Port Type: RJ45 Input Voltage: 5V or 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Installation Dimensions: 67.3 φ3.5mm（2.66 φ 0.14in） Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) OPTIONS: MONITORING SCREEN MECHANICAL SPECIFICATIONS Supply Voltage: 5VDC Communication Port: RJ45 (RS485 Protocol) Supply Current: 30mA Display: Backlit LCD Power Consumption: <1W User Interface: 4 Front Menu Buttons Operating Temperature Range: -4°F~113°F / -20°C~45°C Mounting System: Wall Mount Voltage Accuracy: ±0.1V Dimension: 2.76 x 4.33 x 1.25 inch / 70 x 110 x 31.8 mm Current Accuracy: ±0.1A Weight: 0.14 lbs / 62 g Wire Length: 16.4ft / 5m Certifications: FCC

Read more less

Take your deep cycle battery experience to the next level by investing into Renogy's LFP Battery, combining superior lithium-iron phosphate technology to provide a better solution to solar energy storage. Weighing at just a bit over 14.8 lbs, Renogy's LFP battery surpasses expectation by being lighter, compact, and more powerful than its lead-acid battery counterparts of 50Ah. Designed to replace conventional solar battery storage units such as sealed Sealed, AGM, or Gel batteries, utilize your LFP battery in power-sport applications, off-grid applications, solar energy storage, and more! Take a step into the right direction by pairing your solar system with one of the safest and highest-cycle battery chemistry yet. The Renogy Adventurer Li and Rover charge controller are fully compatible with this battery SPECIFICATION ELECTRIC CHARACTERISTICS Nominal Voltage: 12.8V Energy Density: 114.4Wh/L Rated Capacity (0.2C): 50Ah Internal Resistance: ≤50mΩ Minimal Rated Capacity (0.2C): 47.5Ah Cycle Life (0.2C, 20±5°C): 80% DOD 2000 cycles Energy: 640Wh Specific Energy: 95.5Wh/kg CHARGING PARAMETERS DISCHARGE PARAMETERS Charge Voltage: 14.4 ± 0.2V Maximum Continuous Discharge Current: 50A Maximum Charge Current: 50A Discharge Cut-off Voltage: ≥10V Charge Cut-off Voltage: 14.6V TEMPERATURE PARAMETERS OPERATION TEMPERATURE RANGE TEMPERATURE PARAMETERS STORAGE TEMPERATURE RANGE Charge:32~113℉ / 0～45℃ Less Than 1 Year:32~77℉ / 0~25℃ Discharge:-4~140℉ / -20～60℃ Less Than 3 Months:23~95℉ / -5~35℃ Recommended:73.4 ± 9℉ / 23 ± 5℃ MECHANICAL PROPERTIES Length: 197mm / 7.8 inch Weight: 6.7 kg / 14.7 lbs. Width: 166mm / 6.5 inch Housing Material: ABS+PC Height: 171mm / 6.7 inch Terminal Model: M8x1.25x12mm Cell Model: IFR26650-3.4Ah Assembly Method: 4S15P WARRANTY INFORMATION Accessories 5-year prorated warranty

Read more less

The DCC12 series of battery chargers are the most effective way to charge your auxiliary or house batteries from an alternator/starter battery. Compatible with a wide variety of alternator types, the DCC12 offers correct charging for AGM, Flooded, Gel, and even Lithium deep cycle batteries! These chargers also feature a 3-stage battery charger and multiple electronic protections. Owners can feel confident that their batteries are being charged optimally and automatically. Easily install the compact, yet sturdy, DC1212 on RV's, commercial vehicles, boats, yachts and many more applications! SPECIFICATION RENOGY 60A DC TO DC BATTERY CHARGER Nominal Voltage: 12V Rated Charge Current: 60A Output: 750W Idle Power Consumption: <0.4 A Input Voltage Range: 8V-16V Equalization Voltage: N/A Float Voltage: 13.2-13.8V Boost Voltage: 14.1-14.7V Operating Temperature: -20°C to +50°C Weight: 2.40 kg. / 5.29 lbs Dimensions: 311 x 175 x 68 mm / 12.2 x 6.9 x 2.7 in Terminals: M8 X 10mm, 1mm thread pitch

Read more less

The perfect addition to any off-grid system, whether for a van or a cabin, the Renogy 2000W Pure Sine Wave Power Inverter acts as a DC to AC converter that allows you to power your household appliances. Unlike modified sine wave inverters, this 2000W inverter is a pure sine wave, capable of producing cleaner, smoother, and more reliable electricity to operate tools, fans, lights, and other electronics without interference. Many off-grid systems require a 12V solar inverter to power everyday electronics and this one includes multiple protections to help things run smoothly and safely. The AC priority switch function enables the inverter automatically switch from the battery (DC) to the mains (AC) and vice-vercer whenever the utility company takes/loses power!

Read more less

You'll never doubt you are getting the most out of your system with Renogy's 200W Monocrystalline Starter Kit MPPT. Designed to draw out your system's potential; this kit includes our 20A MPPT charge controller which uses Maximum Power Point Tracking technology; transferring power up to 30% more efficiently than PWM charge controllers. The Renogy Starter Kit MPPT works to provide you with the most efficient system possible and could be a perfect addition to your next off-grid journey. Please kindly note that the kit we sell with MPPT controller doesn't include Solar Y connector because connecting panels in series is ok for MPPT controller as long as the panels' total output voltage won't exceed the controller's max solar input voltage KEY FEATURES Efficient High solar cell efficiency : Monocrystalline 18.4% Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments The included MPPT charge controler has a peak efficiency of 97% Reliable EL tested solar modules; no hot-spot heating guaranteed Corrosion-resistant aluminum frame for extended outdoor use; allowing the panels to last for decades TPT back sheet ensures smooth performance over a long period of time IP65 rated junction box provides complete protection against environmental particles and low pressure water jets Intuitive Sealed; Gel and Flooded charging algorithim ready 4-Stage battery charging process for a rapid; efficient; and safe battery charging Timer function with 1-15 hour option Safe The Renogy Wanderer is equipped with multiple electronic protections; overcharging; overload; short-circuit and reversed polarity Pre-drilled holes on the back of the panel allow for fast and secure mounting Expandable With a Renogy 20A MPPT charge controller; you can expand your system up to a maximum of 200W (12 Volt) or 400W (24 Volt) PACKAGE INCLUDES Renogy 100W Solar Panel(Compact Design) Renogy 20A OR 40A MPPT Rover Charge Controller Mounting Z Brackets Renogy 20ft 10AWG Solar Adaptor Kit (A pair) Renogy 8ft 8AWG Tray Cables (A pair) 2 To 1 Solar Branch Connectors MMF+FFM Pair SPECIFICATION RENOGY 100W MONOCRYSTALLINE SOLAR PANEL THE RENOGY ROVER - 20A MPPT CHARGE CONTROLLER Maximum Power: 100W Nominal system voltage :12V/24V Auto Recognition Maximum System Voltage:600V DC (UL) Rated Battery Current :20A Open-Circuit Voltage (Voc): 21.6V Rated Load Current: 20A Short-Circuit Current (Isc): 6.24A Max. PV Input Short Current :25A Optimum Operating Voltage (Vmp): 17.9V Max. Battery Voltage :32V Optimum Operating Current (Imp): 5.72A Max Solar Input Voltage :100 VDC Weight: 14.3lbs (6.5kg) Mounting Oval :0.30 x 0.18in Dimensions: 42.2 X 19.6 X 1.38 inch (107.18 x 49.78 x 3.51 cm) Net Weight :3.08 lb (1.4kg) Overall Dimension:8.27 x 5.94 x 2.34 inch (21 x 15.1 x 5.94 cm) RENOGY 8FT 10AWG TRAY CABLES (A PAIR) MOUNTING Z BRACKETS (SET) Length: 8ft Eight Long Cap Bolts and Four Short Bolts AWG: 10 Four Spring Washers and Four Washers Rating Voltage: 600/1000V Four Z Shape Solar Panel Brackets Temperature: -40°F to +185°F Four Nuts RENOGY ADAPTOR KIT (SET) RENOGY ROVER 40A MPPT CHARGE CONTROLLER Length: 20ft Rated Battery Current :40A AWG: 10 Rated Load Current:20A Rating Voltage: 600/1000V Max. PV Input Short Current:50A Temperature: -40°F to +185°F Max. Battery Voltage :32V Max Solar Input Voltage :100VDC Max Terminal Size :8AWG Net Weight :4.41 lb(2.0kg)

Read more less

See your next adventure unfold with Renogy E.FLEX 220W portable solar panels. Ergonomic handles make these foldable panels easy to take with you when you’re on the go! They’re powered with PERC monocrystalline solar cells that boost conversion efficiency to 22%. E.FLEX 220W solar panels are super durable and scratch resistant with ETFE film and rugged corner guards – they last 3 times longer than panels made with PET. With IP67 waterproof rating and rugged corner guards, E.FLEX solar panel can deliver plenty of reliable power in the most demanding weather conditions. They’ll charge your portable power stations and batteries wherever your journey takes you. KEY FEATURES Efficiency Meets Durability PERC monocrystalline solar cells deliver a 22% efficiency rating, generating more power in a smaller frame than polycrystalline panels. The ETFE film coating further boosts the power output with up to 95% light transparency and reduces the risks of microcraks & deterioration, giving E.FLEX 220W solar panels a lifespan of over 10 years compared with PET-coated solar panels. Adjustable Support Legs Capture more sunlight with adjustable support legs that provide a wide range of tilt angles. Adjustable tilt means you get up to 30 percent more power generation than panels lying flat on the ground. With E.Flex you can charge deep-cycle batteries and portable power stations with confidence. Made for the Outdoors Robust corner guards and ETFE film protect E.FLEX 220W Portable Solar Panels (IP67-rated) against splashes, dirt, and scratching that can impact power generation. Easy-to-grip handles and a pack-and-go storage case mean you're ready whenever adventure calls. Compatible with Generators & Batteries Plug-and-play solar connectors make E.FLEX 220W portable solar panels the perfect addition to portable solar generators PHOENIX 500 and PHOENIX 1000. It can also be connected to solar charge controllers to charge deep-cycle batteries.(The solar connectors and charge controllers are sold separately.)

Read more less

 eta 7 days delivery time Light and compact power solution for your 24V system! The Renogy 24V Lithium Iron Phosphate Battery is designed for the drop-in replacement of AGM and GEL batteries. Upgrade your power system with this light, compact, safe, and powerful 24V LiFePO4 Battery. Offer an exceptional life span of more than 5 years and 2000 cycles (80% DOD), built-in BMS system for safe charging and discharging, IP65 waterproof, and fast charging speed. It can be utilized for trolling motor, medical computer carts, wheelchairs, and other off-grid systems. Uncompromising Quality Exceptional lifespan with more than 2000 cycles (80% DOD), 4 times of lead-acid battery. Wide discharging temperature range from -4°F to140°F, IP65 waterproof. Fearless of extreme climates, back up your wild adventures. Longer Shelf Life Automatically switch to energy-saving mode in 30s. The self-discharge rate is as low as 3% per month. Offers good performance on storage and endurance. Safe and Reliable The state-of-the-art battery management system (BMS) provides short circuits, overcharging, and over-temperature protection while maintaining a balanced voltage across all cells. Ensures reliable power output and a longer lifespan. Powerful Output Up to 8 batteries can be easily connected in parallel. Auto-balancing function, improve the average charging efficiency of your batteries over extended use. Certified Performance Reliable output and ultra safety. Performance certified with MSDS, UN38.3, FCC, CE, UKCA, PSE. IP65 waterproof, protected against water and dust with the fully sealed housing. SPECIFICATION RENOGY 24V 25AH LITHIUM IRON PHOSPHATE BATTERY Electrical Specifications Temperature Parameters Rated Capacity(0.2C) 25 Ah Operation Temperature Range Charge: 32~131℉ / 0～55℃ Discharge: -4~140℉ / -20～60℃ Recommended: 73.4 ± 9℉ / 23 ± 5℃ Nominal Voltage 25.6 V Storage Temperature Range Less than 1 year: 32~77℉ / 0~25℃ Less than 3 months: 14~95℉ / -10~35℃ Energy 640Wh Mechanical Specifications Cycle Life(0.2C, 20±5℃) 80%DOD 2000 Cycles Dimension (L x W x H) 7.7 x 6.5 x 6.6 in / 197 x 166 x 168 mm Minimal Rated Capacity(0.2C) 25Ah Weight 13.2 lbs. (6 kg) Energy Density 116.50Wh/L Terminal Bolt Size M8 x 1.25 x 20 mm Specific Energy 106.67Wh/kg Housing Material ABS Internal Resistance ≤40mΩ Discharging Parameters Charging Parameters Maximum Continuous Discharge Current 25A Charge Voltage 29.0 ± 0.2V Discharge Cut-off Voltage 20V Maximum Charge Current 25A Certifications Charge Cut-off Voltage 29.2V MSDS, UN38.3, FCC, CE, UKCA, PSE YES Warranty 3-year material warranty    

Read more less

The Renogy Smart Lithium Iron Phosphate Battery enables the auto-balancing among parallel connections and provides more flexibility for the battery bank configuration. The integrated battery management system (BMS) not only protects the battery from various abnormal conditions but monitors and manages the charging and discharging process. The state-of-the-art battery cells ensures an extended cycle life and exceptional discharge performance. With built-in intelligent self-heating, the battery is rechargeable even in low-temperature conditions. If you’re searching for a deep cycle battery for caravan, cabin, or marine use, then this lightweight, auto-balanced, ultra-safe, long-cycle-life lithium battery is the perfect plug-and-play solution for you! NOTE: ● The normal operation of the self-heating function requires a stable charge current greater than 4A for each battery in the parallel battery bank. The self-heating function will not be able to operate normally if a PWM charge controller or a small current battery charger is used to charge the battery at low temperatures. ● Please secure all cable connections to the proper specification in order to ensure good contact between the cable lugs and the terminals. Over-tightening cable connections can cause terminal breakage and loose cable connections can cause terminal meltdown or fire. ● DO NOT string the battery in series. ONLY connect batteries of the same manufacturer and model in parallel. ● Please avoid too high a voltage difference between paralleled batteries, despite the auto-balancing function, to avoid triggering the over-current protection. Auto-Balance Connects multiple batteries in parallel safely with the auto-balancing function to meet the power and energy requirements of different system setups. Ultra-Safety The battery management system (BMS) provides comprehensive protection to the battery and manages the charging and discharging process. Uncompromised Quality The state-of-the-art battery cells ensure an exceptional lifespan of more than 4000 cycles (80% DOD), up to 100A continuous discharge current, and a wide range of operating temperatures. Communication Port The communication ports enable the communication between connected batteries, external devices, and host computers. Self-Heating The intelligent self-heating feature keeps the battery charged in cold environments. SPECIFICATION SPECIFICATIONS Rated Capacity: 100Ah Insulation Resistance: 500V DC, ≥ 10 MΩ Operating Charge Temperature: 32~131°F/ 0~55°C Maximum Continuous Charging Current: 50 A Operating Discharge Temperature: -4~140°F/ -20~60°C Maximum Continuous Discharging Current: 100 A Voltage Range: 10~14.8 V Communication Port: RJ45 (RS485 Protocol) Nominal Voltage: 12.8V Storage Temperature: -13~149°F/ -25~65°C Connection Method: Parallel Cycle Life (0.2C, 25℃): ≥4000 Cycles @ 80% DoD Dimensions:11.4 x 6.8 x 7.4 inch / 289 x 172 x 187.5 mm Weight: 26.2 lbs. / 11.9 kg

Read more less

The REGO DC-DC Battery Charger's exclusive bidirectional charging technology not only provides the most effective way to charge your house batteries from the starter battery on the go but also recharges and maintains your starter battery when the house batteries are full. The battery charger is compatible with the most popular 12V alternators and batteries. 4-Stage charging provides reliable and effective charging of your batteries. The REGO DC-DC battery charger is ideal for RVs, commercial vehicles, boats, yachts, and vans that need stable energy on the go! 【Exclusive Bidirectional Charging】This battery charger can charge your house batteries from the starter battery when driving and recharge your starter battery when the house batteries are full. Keep your house batteries and starter battery at peak performance on the go. 【Easy Installation and Operation】REGO DC-DC battery chargers use Anderson terminals instead of ring terminals for a simple, easy connection that reduces installation time by 60%! REGO’s simple design eliminates tedious data settings and lets you switch between batteries by just turning a knob. 【High-Efficiency Charging】4-stage charging technology (Bulk, Float, Absorption and Equalize) maximize charging efficiency and optimizes battery levels for a longer lifespan. 【Compatible with Most Batteries and Alternators】The REGO DC-DC battery charger is compatible with multiple types of batteries: AGM, SLD, Flooded, Gel, and Lithium, providing a powerful solution for different occasions. Moreover, it can interoperate with both traditional and smart alternators. 【Integrated Safety Features】REGO chargers offer Overvoltage Protection, Overtemperature Protection, and Reverse Polarity Protection on both inputs and outputs to ensure operation safety. They have reverse polarity protection and multiple safety certifications including FCC-ID, CE-RED, MIC, etc. REGO 12V 60A DC-DC BATTERY CHARGER System Voltage: 12V Battery Types:SLD/AGM;FLD;GEL;USER;LI Input Voltage: 10 -16V DC Output Voltage: 10 -16V DC Alternator Input Voltage: Traditional Alternator: 13.5-16VDC Smart Alternator (Euro 6): 12.5-16VDC Maximum Output Current Rating: 60A Output Power: 800W Input Fuse Rating: 90A Output Fuse Rating:80A Idle Power Consumption:≤50 mA Charge Efficiency: Up to 94% Operating Temperature Range:'-20 ℃ - 60℃ / -4 ℉ - 140℉ Storage Temperature Range: '-35 ℃ - 65℃/ -31℉ - 149℉ Humidity:0%-95%, No Condensation Temperature Compensation: '-3mV / ℃ / 2V (Non-Lithium) '0mV / ℃ / 2V; no compensation (Lithium) Electronic Protections: Surge Protection/Short Circuit Protection/Reverse Polarity Protection/Overvoltage Protection/Over Discharge Protection/Overcurrent Protection/Over Temperature Protection/Overcurrent Protection/Open Circuit Protection Grounding Type:Common Negative Lug Communication:Modebus ; RV-C Dimensions (L x W x D):13.78 x 8.39 x 4.02 inch / 350 x 213 x 102 mm Weight:7 lbs/ 3.12kg Terminal Range: 8AWG - 6AWG Terminal Size:Anderson PP75 Certifications: CB, FCC, CE, UKCA, MIC

Read more less

The REGO 12V 60A MPPT Solar Charge Controller focuses on the simplified installation and comprehensive protections for the whole solar system. Plug-and-play hookups for rapid connection, save on installation time than traditional controllers. The integrated high BPU (Battery Protect Unit) technology achieves the highest protection against battery cell damage and battery failure, safeguarding the entire system. With the most efficient MPPT technology with high tracking efficiency of up to 99%, maximum the power generated by solar panels to provide more power for your system. The compact and robust nature of the controller not only has a sense of technology and fashion but also saves on installation space relative to the competition. Add the REGO 12V 60A MPPT Solar Charge Controller, one of the most efficient and reliable controllers on the market yet to your system. KEY FEATURES 【Comprehensive Protections for Whole System】The REGO charge controller with multiple protections on both solar input and battery output terminals. The integrated high BPU (Battery Protect Unit) technology achieves the highest protection against battery cell damage and battery failure, safeguarding the entire system. 【Easy Installation and Operation】REGO charge controller use Anderson terminals with a specially designed Anderson to MC4 adaptor cable for a simple and easy way to connect the controller to your solar panels, cutting installation time by 60%! REGO’s simple design eliminates tedious data settings and lets you switch between batteries by just turning a knob. 【Ultra-High Tracking Efficiency】Innovative MPPT technology of the REGO provides high tracking efficiency of up to 99% and peak conversion efficiency of 98%, which is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day. Adopts a four-stage charging（Bulk,Boost,Float,EQU), ensuring high charging efficiency and optimizing the battery status for a longer lifespan. 【Compatible with Multiple Batteries Types】The REGO charge controller is compatible with multiple types of batteries: AGM, SLD, Flooded, Gel, and Lithium, able to be perfectly and easily added to your solar system, providing a powerful solution for different occasions. 【Puts Monitoring and Control in Your Hands】Built-in Bluetooth allows you to monitor the REGO charge controller on your smartphone with the Renogy DC Home App. With the app, you can customize multiple battery data such as the boost voltage, float voltage, and duration data. Model:RCC60REGO Rated System Voltage:12V Rated Charge Current:60A Rated Max Charge Power:800W Battery Operating Range:10 -16V Battery Types：SLD/AGM;FLD;GEL;USER;LI Max Input Current (short-circuit, Isc):50A Power Limiting Protection:Up to 800W/12V Solar Input Voltage Range (VOC):100V MPPT Voltage Range:15-100 VDC /12V Idle Consumption：≤0.5W Grounding Type：Common Negative Lug Operating Temperature Range：-20 ℃ - 60℃ / -4 ℉ - 140℉ Storage Temperature Range：-25 ℃ - 65℃ / -13 ℉ - 149℉/ Temperature Compensation：-3mV / ℃ / 2V (Non-Lithium) '0mV / ℃ / 2V; no compensation (Lithium) Communication Protocol:CAN Bus Humidity：0%-90%RH Dimensions (L x W x D)：9.43 x 7.36 x 4.28 inch / 239.4 x 187 x 108.8 mm Terminal Size：Anderson PP75 Terminal Range：8AWG-6AWG Certifications： CB+IEC 62109 YES FCC YES CE and RoHS compliant YES UL1741,CAN/CSA-C22.2 No.107.1 YES EMC,EN61000-3-1/-3;EN301489-1/17 YES RF,EN300328 YES

Read more less

The Renogy E.Flex Series is ready to generate electrical power wherever sun rays land—offering a versatile charging solution for portable power stations or off-grid DC batteries. The 120W EFlex portable solar panel is suitable for the new Phoenix 500/1000 power station and most solar generators on the market with the MC4 connector cable. The portable solar panel adopts PERC solar cell technology with a conversion efficiency of up to 22%. The ETFE-laminated case and IP65 water-resistant rating provide ultra protection and are durable enough to extend the panel's lifespan. It's ideal for a road trip, camping, RV, and over-landing.

Read more less

The Renogy 60A Rover MPPT Charge Controller is an intelligent negative ground controller. Built with protections against reverse polarity, short-circuiting, overheating, and more, this MPPT controller is also capable of self-diagnosing itself in the event of an error. Its durable shell protects against general wear and tear, and the aluminum heat sink allows for heat dissipation. The Rover 60A can automatically detect 12V/24V/36V/48V systems and can handle various battery options such as GEL and Lithium. Pair this charge controller with the Renogy BT-1 Bluetooth module and Renogy BT app to view your system's performance in real-time and make parameter changes straight from your smart device. KEY FEATURES ● ETL Listed to UL1741 and CSA C22.2. ● Automatically detects 12V/24V/36V/48V DC system voltages. ● Deep Cycle Sealed, Gel, Flooded, and Lithium battery option ready. ● Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%. ● Electronic protection against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. ● LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes. ● Features diverse load control; also capable of charging over-discharged lithium batteries. ● RS232 port allows the Rover to communicate with the BT-1 Bluetooth module, which can pair with the Renogy BT smartphone app. SPECIFICATION ROVER 60 AMP MPPT SOLAR CHARGE CONTROLLER Nominal Voltage: 12V/24V/36V/48V Auto Recognition Rated Charge Current: 60A Rated Load Current: 20A Max. PV Input Power: 800W/12V; 1600W/24V; 2400W/36V; 3200W/48V Max. PV Input Voltage: 150 VDC (25°C), 140VDC (-25°C) Self-Consumption: 0.7W-1.2W Operating Temperature: -31 °C to 113 °C Temperature Compensation: -3mV/°C/2V (default) Dimensions: 285 x 205 x 102mm (11.22 x 8.07 x 4.00in) Weight: 7.9lbs Enclosure: IP32 Terminals: 25mm2 4AWG WARRANTY INFORMATION Accessories 1-year material warranty

Read more less

Take a trip in the great outdoors with all the comforts of home still at your fingertips. The Renogy RV Kit is perfect for any camper looking to run their favorite small electronics while on the road. Unlike traditional gas generators, the Renogy 200 Watt 12 Volt Solar RV Kit silently recharges your batteries so you can enjoy the great outdoors without the extra noise. Solar panels also allow you to run limited low watt electrical equipment without a power hookup. Renogy RV Kits are carefully arranged to meet your RV needs. This kit includes two 100W 12V Monocrystalline Solar Panels, one Adventurer 30A PWM Charge Controller, one 30ft 10AWG Solar Adaptor Kit, one 16ft 10AWG Tray Cable, one pair of Branch Connectors, a BT-1 Bluetooth Module and one Cable Entry Housing. The Adventurer 30A PWM Charge Controller is specifically designed for RV applications as it allows for aesthetically clean flush mounting on walls and is negative-grounded for battery compatibility. It also features an LCD screen for displaying system operation information and data and allows for full control of parameter settings. The control is embedded with self-diagnostics and electronic protection functions that prevent damage from installation mistakes or system faults. Newly added BT-1 Bluetooth Module enables user to pair the charge controller with our smartphone app DC Home. The APP allows you to view system performance in real time and make parameter changes right from your smartphone! SPECIFICATION RENOGY 100W MONOCRYSTALLINE SOLAR PANEL RENOGY BT-1 BLUETOOTH MODULE Maximum Power at STC: 100W Input Voltage: 5V-12V Maximum System Voltage: 600V DC (UL) Communication Range: ≤15m Open-Circuit Voltage (Voc): 24.3V Dimensions: 2.6 X 2.01 X 0.61 In Short-Circuit Current (Isc): 5.21A Weight: 120 g (4.2oz) Optimum Operating Voltage (Vmp): 20.4V Optimum Operating Current (Imp): 4.91A Weight: 14.1 lbs/6.4 kg Dimensions: 41.8 x 20.9 x1.4 in(106.17 x 53.09 x3.56 cm) RENOGY 16FT 10AWG TRAY CABLES (A PAIR) RENOGY SOLAR Y BRANCH CONNECTORS Length: 16ft Withstanding Voltage: 1000V DC(TUV), 600V(UL) AWG: 10 Protection Degree: IP67, mated Rating Voltage: 600V Wiring Size Range: 10, 12, 14 AWG Temperature: -40°F to +185°F Temperature: -40°F to +194°F RENOGY ADVENTURER - 30A PWM NEGATIVE-GROUND CHARGE CONTROLLER WITH LCD DISPLAY RENOGY CABLE ENTRY HOUSING Nominal Voltage: 12 VDC Material: UV-resistant ABS Plastic; Rated Charge Current: 30A Weight (each component): 7.9 oz. Max. PV Input Voltage: 25 VDC Recommended Adhesive: Sikaflex 252 or alike; Max. PV Input Power: 400W (12V) Dimensions (l x w x h): 4.7 x 3.9 x 2.0 in Cable Gland Diameter Range: 6mm – 12mm; MOUNTING Z BRACKETS (SET) RENOGY 30FT 10AWG SOLAR ADAPTOR KIT (A PAIR) Eight Long Cap Bolts and Four Short Bolts; Length: 30ft Four Spring Washers and Four Washers; AWG: 10 Four Z Shape Solar Panel Brackets Rating Voltage: 600/1000V Four Nuts Temperature: -40°F to +185°F PACKAGE INCLUDES 100W Mono Solar Panel Renogy Adventurer-30A PWM Charge Controller Renogy Solar Y Branch Connectors Renogy 30ft 10AWG Solar Adaptor Kit Cable Entry Housing Renogy 16ft 10AWG Tray Cables Mounting Z Brackets Renogy BT-1 Bluetooth Module KEY FEATURES Efficient High solar cell efficiency : Monocrystalline 21% Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments Reliable EL tested solar modules; no hot-spot heating guaranteed Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades TPT back sheet ensures smooth performance over a long period of time IP65 rated junction box provides complete protection against environmental particles and low pressure water jets Intuitive Sealed, Gel and Flooded charging algorithim ready 4-Stage battery charging process for a rapid, efficient, and safe battery charging Remote monitoring and control via Bluetooth Safe The Renogy Adventurer is equipped with multiple electronic protections: reverse current, overcharging, short-circuit and reversed polarity Pre-drilled holes on the back of the panel allow for fast and secure mounting Expandable With the Renogy Adventurer 30A PWM Flush Mount Charge Controller, you can expand your system up to a maximum of 400W. The Renogy 100W Monocrystalline Expansion Kit is the perfect solution for future expansion

Read more less

Take power wherever you go. PHOENIX 200 is one of the lightest portable power stations with only 5.3 pounds and a capacity of 222Wh. PHOENIX 200 can be charged to 80% in 1.5 hours when AC and USB-C are charged simultaneously at maximum power. It provides 4 recharging options: AC, USB-C, solar, and car. The PHOENIX 200 solar generator can power 6 devices simultaneously and charge devices while recharging itself. It's ideal for camping, road trips, photography, remote work, and outdoor activities. Light and Compact Take power wherever you go. PHOENIX 200 is one of the lightest portable power station with only 5.3 pounds and a capacity of 222Wh. Industry-Leading Recharging Speed PHOENIX 200 solar generator can be charged to 80% in 1.5 hours when AC and USB-C are charged simultaneously at maximum power. It provides 4 recharging methods: AC, USB-C, solar, and car. The diverse charging options suit different usage scenarios, such as home, car, and outdoor. Charging 6 Devices at the same time Compatible with most portable devices and small appliances, and can charge 6 devices simultaneously via 2 AC power outlets, 2 USB-A fast charging ports, 1 USB-C port, and 1 CIG port. The USB-C port can charge your devices at full speed without the bulky adapters, including phones, laptops, and handheld game consoles. Protect Your Electronic Devices The built-in pure sine wave inverter provides up to 200W quality AC equivalent to grid power which will protect your sensitive equipment such as CPAP. Intelligent and Convenient Quickly check your charging status with an informative LCD display, including battery level, input and output power, and estimated recharging time. Phoenix will automatically shut down when not charging for a certain period to save power. It can also be set to disable and enable CIG Port and AC Outlets by the simple push of buttons, to meet your needs. Charge Temperature 32°F~104°F / 0°C~40°C (Recommended);32°F~131°F / 0°C~55°C (Extreme) Discharge Temperature 23°F~113°F / -5°C~45°C (Recommended);-4°F~140°F / -20°C~60°C (Extreme) Dimension 7.48 x 6.10 x 6.99 inch / 190 x 155 x 170 mm

Read more less

Take power wherever you go. PHOENIX 200 is one of the lightest portable power stations with only 5.3 pounds and a capacity of 222Wh. PHOENIX 200 can be charged to 80% in 1.5 hours when AC and USB-C are charged simultaneously at maximum power. It provides 4 recharging options: AC, USB-C, solar, and car. The PHOENIX 200 solar generator can power 6 devices simultaneously and charge devices while recharging itself. It's ideal for camping, road trips, photography, remote work, and outdoor activities. Light and Compact Take power wherever you go. PHOENIX 200 is one of the lightest portable power station with only 5.3 pounds and a capacity of 222Wh. Industry-Leading Recharging Speed PHOENIX 200 solar generator can be charged to 80% in 1.5 hours when AC and USB-C are charged simultaneously at maximum power. It provides 4 recharging methods: AC, USB-C, solar, and car. The diverse charging options suit different usage scenarios, such as home, car, and outdoor. Charging 6 Devices at the same time Compatible with most portable devices and small appliances, and can charge 6 devices simultaneously via 2 AC power outlets, 2 USB-A fast charging ports, 1 USB-C port, and 1 CIG port. The USB-C port can charge your devices at full speed without the bulky adapters, including phones, laptops, and handheld game consoles. Protect Your Electronic Devices The built-in pure sine wave inverter provides up to 200W quality AC equivalent to grid power which will protect your sensitive equipment such as CPAP. Intelligent and Convenient Quickly check your charging status with an informative LCD display, including battery level, input and output power, and estimated recharging time. Phoenix will automatically shut down when not charging for a certain period to save power. It can also be set to disable and enable CIG Port and AC Outlets by the simple push of buttons, to meet your needs. Charge Temperature 32°F~104°F / 0°C~40°C (Recommended);32°F~131°F / 0°C~55°C (Extreme) Discharge Temperature 23°F~113°F / -5°C~45°C (Recommended);-4°F~140°F / -20°C~60°C (Extreme) Dimension 7.48 x 6.10 x 6.99 inch / 190 x 155 x 170 mm

Read more less

  The 24V 100Ah LiFePO4 Battery has industry-leading 200W heating elements that enable it to heat up twice as fast as similar battery models. For optimal self-heating, ensure a charge current of more than 10A per battery. Low-temperature charging and discharging protection takes effect when necessary to preventCell damage. You can also bundle up to 16 batteries for a total of 40.96kWh of power, perfect for providing backup during blackouts or other projects. Renogy ensures performance and reliability with rigorous testing. This 24V battery has a similar size, yet produces five times more power per kilo. Never be without power - be prepared. RENOGY 24V 100AH CORE SERIES DEEP CYCLE LITHIUM IRON PHOSPHATE BATTERY Battery Type: Lithium Iron Phosphate Nominal Voltage: 25.6V Rated Capacity: 100Ah (0.5C, 25℃) Voltage Range: 20.0V to 29.2V Charge Voltage: 29.0V Maximum Charge Current: 100A Maximum Discharge Current: 100A Peak Discharge Current: 300A @ 5s Cycle Life (0.5C/1C, 25℃): 5000 Cycles (80% DOD, 80% EOL) Charge Temperature Range: '-4°F to 131°F (-20°C to 55°C) Discharge Temperature Range: '-4°F to 140°F (-20°C to 60°C) Storage Temperature Range: '-13°F to 149°F (-25C to 65°C) Operation Relative Humidity: 10% to 95% Connection Method: Series (Up to 2) Parallel (Up to 8) Series & Parallel (2S8P) Terminal Bolt Size: M8 x 1.25 x 15 mm Recommended Terminal Torque: 10 N·m Housing Material: ABS & PC Protection Rating: IP65 Dimensions: 20.55 x 9.45 x 8.62 inch (522 x 240 x 219 mm) Weight: 46.3 lbs. (21.0 kg) ACCESSORIES Long Terminal Bolts (2): M8 opc:   WARRANTY Material and Workmanship Warranty: 5 Years Certifications: UL, RoHS, MSDS, UN38.3, FCC , PSE, CE, UKCA

Read more less

Manual The Renogy Power Station 500 is just right for everything. Armed with a 495Wh lithium-ion battery pack and an 800W pure sine wave inverter, you've got enough power for all your precious moment on the road. Renogy Power Station 500 can power 8 devices simultaneously while getting itself recharged. The iTurbo technology allows you to recharge the Renogy Power Station 500 to 80% in just 1-hour. 3 recharging options (AC, solar, and car) allow a quick energy boost even under the worst scenarios. Style the energy together with your friend on the go with the iStack function; simply connect two Renogy 500 power stations with a single-phase parallel kit (sold separately) to double the capacity and AC output simultaneously. The integrated strip lights offer 3 lighting modes for ambient lighting, and DC HOME app allows you to monitor and set the Renogy Power Station 500 in your way. KEY FEATURES 1-Hour AC Fast Recharge Recharge the portable power station from 0% to 80% using an AC outlet in only 1 hour with super-fast iTurbo technology. With iTurbo, renogy PHX500 solar generator recharges 4 times faster than conventional power station. Quick Charging & capacity With an output of up to 800W (Surge 1600W), this portable generator of large capacity 495wh, can power up to 8 devices simultaneously with multiple outlet options, including 2 pure sine wave AC outlets, 1*18W USB-A fast charging ports, 2*12W USB-A ports, 1*100W USB-C port, and 1 CIG port. The USB-C port can charge your devices at full speed without the bulky adapters, including phones, laptops, and handheld game consoles. With a whole host of ports, from 600W AC outlets to USB-C, we've got all your device's plugs covered. Clean, Fast Solar charging The portable power station camping is compatible with renogy e.flex 220W portable solar panel, getting recharged to 80% in 2.5 hours. The integrated MPPT algorithm optimizes solar energy generation efficiency to operate at its max power point, making them ideal portable power kits for tent camping, overland journey and more. Intelligent BMS Protection & Pure Sine Wave Armed with a 495wh lithium-ion battery backup, the solar powered generator features 3 Pure Sine Wave AC outlets that deliver stable and safe 800W power. camping power station has a built-in advanced battery management system, auto-regulating to keep you safe with reverse polarity protection, high/low temperature protection, short circuit protection, undervoltage protection, overvoltage protection, overcurrent protection. Expandable for More Power Double your power capacity and AC output with the iStack function! Simply connect two PHX500 portable solar generators with a single-phase parallel kit (sold separately). With iStack you can expand storage capacity to 990Wh and ramp up AC output to 1440W. Take Control of Your Energy A wider monitor and customizable power button let you set up PHX500 to meet your specific power needs. The DC HOME app lets you control your connected devices remotely and monitor power status wherever you are. Seamless Backup Power Supply In the event of a power outage, connect the AC port to a wall outlet, and PHX500 portable generator for camping delivers emergency AC power with a transfer time of less than 20ms. No need to worry about interruptions to work or gaming.  

Read more less