The Renogy 100W Solar Power Starter Kit is perfect for new customers wanting to get a start in solar. The Starter Kit is great for off-grid applications; such as RVs; trailers; boats; sheds; and cabins — providing many benefits; including; but not limited to; quiet power production and grid independence. Adding a monocrystalline solar panel kit can extend your travels further then ever before. This solar kit comes with the tools necessary for a new system: one Renogy 100W 12V Mono Solar Panels; one 30A PWM Wanderer Charge Controller; one 20ft 10AWG Solar Adaptor Kit; one 8ft 10AWG Tray Cable; and one set of Z-brackets. Start your solar adventure with a Renogy Starter Kit. KEY FEATURES Efficient ● High solar cell efficiency : Monocrystalline 18.4% ● Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments Reliable ● EL tested solar modules; no hot-spot heating guaranteed ● Corrosion-resistant aluminum frame for extended outdoor use; allowing the panels to last for decades ● TPT back sheet ensures smooth performance over a long period of time ● IP65 rated junction box provides complete protection against environmental particles and low pressure water jets Intuitive ● Sealed; Gel and Flooded charging algorithim ready ● 4-Stage battery charging process for a rapid; efficient; and safe battery charging Safe ● The Renogy Wanderer is equipped with multiple electronic protections; overcharging; overload; short-circuit and reversed polarity ● Pre-drilled holes on the back of the panel allow for fast and secure mounting Expandable ● With the Renogy Wanderer 30A PWM Charge Controller; you can expand your system up to a maximum of 400W SPECIFICATION RENOGY 100W MONOCRYSTALLINE SOLAR PANEL THE RENOGY WANDERER - 30A PWM NEGATIVE-GROUND CHARGE CONTROLLER Maximum Power: 100W Norminal Voltage: 12VDC Maximum System Voltage:600V DC (UL) Rated Charge Current: 30A Open-Circuit Voltage (Voc): 21.6V Max. PV Input Voltage: 25 VDC Short-Circuit Current (Isc): 6.24A Max. PV Input Power: 400W (12V) Optimum Operating Voltage (Vmp): 17.9V Optimum Operating Current (Imp): 5.72A Weight: 14.3lbs(6.5kg) Dimensions: 42.2 X 19.6 X 1.38 in(1074x498x35mm) RENOGY 8FT 10AWG TRAY CABLES (A PAIR) MOUNTING Z BRACKETS (SET) Length: 8ft Eight Long Cap Bolts and Four Short Bolts AWG: 10 Four Spring Washers and Four Washers Rating Voltage: 600/1000V Four Z Shape Solar Panel Brackets Temperature: -40°F to +185°F Four Nuts RENOGY ADAPTOR KIT (SET) Length: 20ft AWG: 10 Rating Voltage: 600/1000V Temperature: -40°F to +185°F WARRANTY INFORMATION Panels 25-year transferable power output warranty: 5 year/95% efficiency rate; 10 year/90% efficiency rate; 25-year/80% efficiency rate 5-year material and workmanship warranty Accessories 1-year material warranty

Read more less

You'll never doubt you are getting the most out of your system with Renogy's 200W Monocrystalline Starter Kit MPPT. Designed to draw out your system's potential; this kit includes our 20A MPPT charge controller which uses Maximum Power Point Tracking technology; transferring power up to 30% more efficiently than PWM charge controllers. The Renogy Starter Kit MPPT works to provide you with the most efficient system possible and could be a perfect addition to your next off-grid journey. Please kindly note that the kit we sell with MPPT controller doesn't include Solar Y connector because connecting panels in series is ok for MPPT controller as long as the panels' total output voltage won't exceed the controller's max solar input voltage KEY FEATURES Efficient High solar cell efficiency : Monocrystalline 18.4% Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments The included MPPT charge controler has a peak efficiency of 97% Reliable EL tested solar modules; no hot-spot heating guaranteed Corrosion-resistant aluminum frame for extended outdoor use; allowing the panels to last for decades TPT back sheet ensures smooth performance over a long period of time IP65 rated junction box provides complete protection against environmental particles and low pressure water jets Intuitive Sealed; Gel and Flooded charging algorithim ready 4-Stage battery charging process for a rapid; efficient; and safe battery charging Timer function with 1-15 hour option Safe The Renogy Wanderer is equipped with multiple electronic protections; overcharging; overload; short-circuit and reversed polarity Pre-drilled holes on the back of the panel allow for fast and secure mounting Expandable With a Renogy 20A MPPT charge controller; you can expand your system up to a maximum of 200W (12 Volt) or 400W (24 Volt) PACKAGE INCLUDES Renogy 100W Solar Panel(Compact Design) Renogy 20A OR 40A MPPT Rover Charge Controller Mounting Z Brackets Renogy 20ft 10AWG Solar Adaptor Kit (A pair) Renogy 8ft 8AWG Tray Cables (A pair) 2 To 1 Solar Branch Connectors MMF+FFM Pair SPECIFICATION RENOGY 100W MONOCRYSTALLINE SOLAR PANEL THE RENOGY ROVER - 20A MPPT CHARGE CONTROLLER Maximum Power: 100W Nominal system voltage :12V/24V Auto Recognition Maximum System Voltage:600V DC (UL) Rated Battery Current :20A Open-Circuit Voltage (Voc): 21.6V Rated Load Current: 20A Short-Circuit Current (Isc): 6.24A Max. PV Input Short Current :25A Optimum Operating Voltage (Vmp): 17.9V Max. Battery Voltage :32V Optimum Operating Current (Imp): 5.72A Max Solar Input Voltage :100 VDC Weight: 14.3lbs (6.5kg) Mounting Oval :0.30 x 0.18in Dimensions: 42.2 X 19.6 X 1.38 inch (107.18 x 49.78 x 3.51 cm) Net Weight :3.08 lb (1.4kg) Overall Dimension:8.27 x 5.94 x 2.34 inch (21 x 15.1 x 5.94 cm) RENOGY 8FT 10AWG TRAY CABLES (A PAIR) MOUNTING Z BRACKETS (SET) Length: 8ft Eight Long Cap Bolts and Four Short Bolts AWG: 10 Four Spring Washers and Four Washers Rating Voltage: 600/1000V Four Z Shape Solar Panel Brackets Temperature: -40°F to +185°F Four Nuts RENOGY ADAPTOR KIT (SET) RENOGY ROVER 40A MPPT CHARGE CONTROLLER Length: 20ft Rated Battery Current :40A AWG: 10 Rated Load Current:20A Rating Voltage: 600/1000V Max. PV Input Short Current:50A Temperature: -40°F to +185°F Max. Battery Voltage :32V Max Solar Input Voltage :100VDC Max Terminal Size :8AWG Net Weight :4.41 lb(2.0kg)

Read more less

Take a trip in the great outdoors with all the comforts of home still at your fingertips. The Renogy RV Kit is perfect for any camper looking to run their favorite small electronics while on the road. Unlike traditional gas generators, the Renogy 200 Watt 12 Volt Solar RV Kit silently recharges your batteries so you can enjoy the great outdoors without the extra noise. Solar panels also allow you to run limited low watt electrical equipment without a power hookup. Renogy RV Kits are carefully arranged to meet your RV needs. This kit includes two 100W 12V Monocrystalline Solar Panels, one Adventurer 30A PWM Charge Controller, one 30ft 10AWG Solar Adaptor Kit, one 16ft 10AWG Tray Cable, one pair of Branch Connectors, a BT-1 Bluetooth Module and one Cable Entry Housing. The Adventurer 30A PWM Charge Controller is specifically designed for RV applications as it allows for aesthetically clean flush mounting on walls and is negative-grounded for battery compatibility. It also features an LCD screen for displaying system operation information and data and allows for full control of parameter settings. The control is embedded with self-diagnostics and electronic protection functions that prevent damage from installation mistakes or system faults. Newly added BT-1 Bluetooth Module enables user to pair the charge controller with our smartphone app DC Home. The APP allows you to view system performance in real time and make parameter changes right from your smartphone! SPECIFICATION RENOGY 100W MONOCRYSTALLINE SOLAR PANEL RENOGY BT-1 BLUETOOTH MODULE Maximum Power at STC: 100W Input Voltage: 5V-12V Maximum System Voltage: 600V DC (UL) Communication Range: ≤15m Open-Circuit Voltage (Voc): 24.3V Dimensions: 2.6 X 2.01 X 0.61 In Short-Circuit Current (Isc): 5.21A Weight: 120 g (4.2oz) Optimum Operating Voltage (Vmp): 20.4V Optimum Operating Current (Imp): 4.91A Weight: 14.1 lbs/6.4 kg Dimensions: 41.8 x 20.9 x1.4 in(106.17 x 53.09 x3.56 cm) RENOGY 16FT 10AWG TRAY CABLES (A PAIR) RENOGY SOLAR Y BRANCH CONNECTORS Length: 16ft Withstanding Voltage: 1000V DC(TUV), 600V(UL) AWG: 10 Protection Degree: IP67, mated Rating Voltage: 600V Wiring Size Range: 10, 12, 14 AWG Temperature: -40°F to +185°F Temperature: -40°F to +194°F RENOGY ADVENTURER - 30A PWM NEGATIVE-GROUND CHARGE CONTROLLER WITH LCD DISPLAY RENOGY CABLE ENTRY HOUSING Nominal Voltage: 12 VDC Material: UV-resistant ABS Plastic; Rated Charge Current: 30A Weight (each component): 7.9 oz. Max. PV Input Voltage: 25 VDC Recommended Adhesive: Sikaflex 252 or alike; Max. PV Input Power: 400W (12V) Dimensions (l x w x h): 4.7 x 3.9 x 2.0 in Cable Gland Diameter Range: 6mm – 12mm; MOUNTING Z BRACKETS (SET) RENOGY 30FT 10AWG SOLAR ADAPTOR KIT (A PAIR) Eight Long Cap Bolts and Four Short Bolts; Length: 30ft Four Spring Washers and Four Washers; AWG: 10 Four Z Shape Solar Panel Brackets Rating Voltage: 600/1000V Four Nuts Temperature: -40°F to +185°F PACKAGE INCLUDES 100W Mono Solar Panel Renogy Adventurer-30A PWM Charge Controller Renogy Solar Y Branch Connectors Renogy 30ft 10AWG Solar Adaptor Kit Cable Entry Housing Renogy 16ft 10AWG Tray Cables Mounting Z Brackets Renogy BT-1 Bluetooth Module KEY FEATURES Efficient High solar cell efficiency : Monocrystalline 21% Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments Reliable EL tested solar modules; no hot-spot heating guaranteed Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades TPT back sheet ensures smooth performance over a long period of time IP65 rated junction box provides complete protection against environmental particles and low pressure water jets Intuitive Sealed, Gel and Flooded charging algorithim ready 4-Stage battery charging process for a rapid, efficient, and safe battery charging Remote monitoring and control via Bluetooth Safe The Renogy Adventurer is equipped with multiple electronic protections: reverse current, overcharging, short-circuit and reversed polarity Pre-drilled holes on the back of the panel allow for fast and secure mounting Expandable With the Renogy Adventurer 30A PWM Flush Mount Charge Controller, you can expand your system up to a maximum of 400W. The Renogy 100W Monocrystalline Expansion Kit is the perfect solution for future expansion

Read more less