Morningstar Prostar 15M Solar Charge Controller with LCD Display: Feature packed with an LCD monitor, either 12v or 24v auto select up to 15amps. A maximum input of 210w @12v and 420w @24v (15A @ 12v and 24v ). Morningstar’s ProStar™ is the world’s leading mid-range solar controller for both professional and consumer applications. Highly advanced electronics with a multitude of great features. + 5 Year Warranty Features: • Versions available: 15 or 30 amp 12 / 24 or 48 volt negative or positive ground (this is the 15A 12/24v version) • Estimated 15 year life • PWM series battery charging (not shunt) • 3-position battery select: gel, sealed or flooded • Very accurate control and measurement • Jumper to eliminate telecom noise • Parallel for up to 300 amps • Temperature compensation • Tropicalization: conformal coating, stainlesssteel fasteners & anodized aluminum heat sink • No switching or measurement in the grounded leg • 100% solid state • Very low voltage drops • Current compensated low voltage disconnect (LVD) • LED’s indicate battery status and faults • Capable of 25% overloads • Remote battery voltage sense terminals Electronic Protections: • Short-circuit — solar and load • Overload — solar and load • Reverse polarity • Reverse current at night • High voltage disconnect • High temperature disconnect • Lightning and transient surge protection • Loads protected from voltage spikes • Automatic recovery with all protections Rated Solar Current 15A Rated Load Current 15A System Voltage 12/24V Battery Voltage Setpoints* Gel / Sealed / Flooded Regulation Voltage 14.0 / 14.15 / 14.4 Float 13.7 / 13.7 / 13.7 Equalization n/a 14.35 / 14.9 / 15.1 Load Disconnect 11.4 / 11.4 / 11.4 Load Reconnect 12.6 / 12.6 / 12.6 Note: values are for 12V. Use 2X for 24V systems Electrical Specifications: 12V 24V Temp. Comp. (mV/˚C)* – 30mV – 60mV Accuracy 40mV 60mV Min. voltage to operate 8V 8V Self-consumption 22mA 25mA LVD current coefficient** – 20mV – 40mV Charge algorithm PWM, constant voltage Operating temperature – 40˚C to + 60˚C Digital Display: Operating temperature – 30˚C to + 85˚C Voltage accuracy 0.5% Current accuracy 2.0% Self-consumption 1 mA Delivery time 3-5 days on all orders

Read more less

Morningstar Prostar 30M Solar Charge Controller with LCD Display: Feature packed with an LCD monitor, either 12v or 24v auto select up to 30amps. A maximum input of 360w @12v and 700w @24v (30A @ 12v and 24v ). Morningstar’s ProStar™ is the world’s leading mid-range solar controller for both professional and consumer applications. Highly advanced electronics with a multitude of great features. + 5 Year Warranty Features: • Versions available: 15 or 30 amp 12 / 24 or 48 volt negative or positive ground (this is the 30A 12/24v version) • Estimated 15 year life • PWM series battery charging (not shunt) • 3-position battery select: gel, sealed or flooded • Very accurate control and measurement • Jumper to eliminate telecom noise • Parallel for up to 300 amps • Temperature compensation • Tropicalization: conformal coating, stainlesssteel fasteners & anodized aluminum heat sink • No switching or measurement in the grounded leg • 100% solid state • Very low voltage drops • Current compensated low voltage disconnect (LVD) • LED’s indicate battery status and faults • Capable of 25% overloads • Remote battery voltage sense terminals Electronic Protections: • Short-circuit — solar and load • Overload — solar and load • Reverse polarity • Reverse current at night • High voltage disconnect • High temperature disconnect • Lightning and transient surge protection • Loads protected from voltage spikes • Automatic recovery with all protections Rated Solar Current 30A Rated Load Current 30A System Voltage 12/24V Battery Voltage Setpoints* Gel / Sealed / Flooded Regulation Voltage 14.0 / 14.15 / 14.4 Float 13.7 / 13.7 / 13.7 Equalization n/a 14.35 / 14.9 / 15.1 Load Disconnect 11.4 / 11.4 / 11.4 Load Reconnect 12.6 / 12.6 / 12.6 Note: values are for 12V. Use 2X for 24V systems Electrical Specifications: 12V or 24V Temp. Comp. (mV/˚C)* – 30mV – 60mV Accuracy 40mV 60mV Min. voltage to operate 8V 8V Self-consumption 22mA 25mA LVD current coefficient** – 20mV – 40mV Charge algorithm PWM, constant voltage Operating temperature – 40˚C to + 60˚C Digital Display: Operating temperature – 30˚C to + 85˚C Voltage accuracy 0.5% Current accuracy 2.0% Self-consumption 1 mA Delivery time 3-5 days on all orders

Read more less

Introducing our fully programmable 4 channel relay switch, the ultimate solution for advanced voltage control, fault/alarm control, load control, and generator autostart control of any 12V/24V/36V/48V DC system. This high-quality switch is designed to deliver maximum performance and versatility, providing complete control over your DC power systems. With the ability to program each of its 4 channels individually, this relay switch delivers superior flexibility and customization. You can program each channel to perform a specific task, such as controlling voltage, fault/alarm monitoring, load control, or generator autostart, depending on your specific needs. The advanced voltage control capabilities of this switch allow you to precisely regulate the voltage output of your DC power system, ensuring that your equipment is always operating at optimal levels. The fault/alarm control feature alerts you to any potential issues or malfunctions, allowing you to take immediate action to avoid downtime or damage to your equipment. The load control function lets you manage the amount of power your system is drawing, so you can avoid overloading your system and ensure that it is always operating at peak efficiency. The generator autostart control feature ensures that your generator starts automatically when the battery voltage falls below a specified level, ensuring that your system always has the power it needs, even during extended power outages. Overall, our fully programmable 4 channel relay switch is a powerful and versatile solution for controlling and managing your DC power systems. With its advanced features and customization options, this switch delivers the performance, reliability, and flexibility that you need to keep your systems running smoothly and efficiently.

Read more less

Introducing our 25A dual battery solar charge controller/regulator with an LCD monitor, designed for independent charging of two 12V batteries from solar panels up to 400W. This charge controller is perfect for off-grid solar power systems where two batteries are needed, providing reliable and efficient charging capabilities for both batteries. This charge controller/regulator is compatible with solar panels up to 400W and has a maximum charging current of 25A, ensuring efficient and effective charging of your batteries. The LCD monitor allows for easy monitoring of battery charging status and solar power output, providing real-time information on the performance of your solar power system. In addition, this charge controller/regulator is designed for use with two 12V batteries, but can also be used with just one battery, making it a versatile solution for a wide range of solar power applications. The dual battery charging feature ensures that both batteries receive independent and efficient charging, providing optimal performance and longevity for your batteries. This charge controller/regulator is equipped with a variety of advanced features, including overcharge protection, over-discharge protection, and reverse polarity protection, ensuring the safety and reliability of your solar power system. Overall, our 25A dual battery solar charge controller/regulator with an LCD monitor is a reliable and efficient solution for managing and regulating your solar power system. With its dual battery charging capabilities, LCD monitor, and advanced features, this charge controller delivers superior performance and reliability, ensuring that your solar power system always operates at its maximum potential.

Read more less

Morningstar Sunsaver MPPT Solar Charge Controller: Morningstar’s SunSaver MPPT™ solar controller with TrakStar™ Technology is an advanced maximum power point tracking (MPPT) battery charger for off-grid PV systems. Converts 36v, 24v and 12v to 12v or 24v charging 97.5% efficiency. 5 Year Warranty 15 Amp Maximum Battery Current LOWER COST INCLUDES LOAD CONTROL MAXIMIZES ENERGY HARVEST PROVIDES POWER BOOST USE OF HIGH VOLTAGE MODULES FULLY ADJUSTABLE AND PROGRAMMABLE EXTENSIVE ELECTRONIC PROTECTIONS LONGER BATTERY LIFE MORE SYSTEM INFORMATION DATA LOGGING CONVERTS 36V OR 24V PV ARRAYS Electrical • Peak Efficiency 97.5% • Nominal Battery Voltage 12 or 24 volts • Max. Battery Current 15 amps • Battery Voltage Range 7-36 volts • Max. PV Open Circuit Voltage 75 volts • Nominal Max. PV Input / 12 volt battery 200 Watts / 24 volt battery 400 Watts • Output Rating 15 amps load control • Self Consumption 35 milliamps • Transient Surge Protection 4 x 1500 Watts Environmental • Operating Temperature –40°C to +60°C • Storage Temperature –55°C to +100°C • Humidity 100% non-condensing • Tropicalization Epoxy encapsulation Conformal coating Marine rated terminals Electronic Protections • PV: Overload, Short Circuit, High Voltage • Load: Overload, Short Circuit • Reverse Polarity: Battery, PV and Load • Lightning and Transient Surges • High Temperature • Reverse Current at Night Battery Charging • Battery Types Gel, Sealed, AGM, Flooded • 4 Stage Charging Bulk, absorption, float, equalize (optional) • Temperature Compensation Coefficient –5mV/°C / cell (25°C ref) Range –30°C to +60°C Set points Absorption, float, equalize Mechanical • Dimensions 16.9 x 6.4 x 7.3 cm / 6.6 x 2.5 x 2.9 inch • Weight 0.60 kg / 1.3 lbs • Power Terminal 16 mm2 / #6 AWG • Enclosure Die cast aluminum with plastic cover options • Remote Meter • Remote Temperature Sensor • PC MeterBus Adapter • DIN Rail Mounting Clips Certifications • CE Compliant • RoHS Compliant • Manufactured in a certified ISO 9001 facility • UL1741 / CSA.107.1 recognized component Delivery time 3-5 days on all orders

Read more less

Introducing our 30A MPPT solar charge controller/regulator for charging batteries, designed to provide efficient and reliable performance for your solar power system. Equipped with advanced TrakStar technology, this high-quality charge controller delivers maximum power point tracking efficiency, ensuring optimal energy production from your solar panels. This charge controller is compatible with 12V, 24V, 36V, and 48V battery systems, making it a versatile solution for a wide range of solar power applications. With its 30A capacity, this charge controller is designed to handle medium-sized solar power systems, providing superior control and regulation of your solar power output. The TrakStar technology used in this charge controller ensures that it always delivers maximum efficiency and energy production from your solar panels. This technology continually monitors and adjusts the charge controller's settings to ensure that your solar panels are always operating at their highest possible efficiency, even in low-light or cloudy conditions. In addition, this charge controller is equipped with a variety of advanced features, including overcharge protection, over-discharge protection, and reverse polarity protection, ensuring the safety and reliability of your solar power system. Overall, our 30A MPPT solar charge controller/regulator with advanced TrakStar technology is an efficient and reliable solution for managing and regulating your solar power system. With its versatile compatibility, medium capacity, and advanced features, this charge controller delivers superior performance and reliability, ensuring that your solar power system always operates at its maximum potential.

Read more less

Morningstar Tristar 45 MPPT Solar Charge Controller: Morningstar’s TriStar MPPT solar controller with TrakStar Technology™ is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW. The controller provides the industry’s highest peak efficiency of 99% and significantly less power loss compared to other MPPT controllers.The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely fast sweeping of the entire I-V curve. This product is the first PV controller to include on-board Ethernet for a fully web-enabled interface and includes up to 200 days of data logging. Maximizes Energy Harvest Our TrakStar MPPT Technology features: • Better peak power point tracking than other MPPT controllers • Very fast sweeping of the entire I-V curve • Recognition of multiple power points during shading or mixed PV arrays • Excellent performance at sunrise and low solar insolation levels Extremely High Reliability • Robust thermal design and no cooling fans • Parallel circuit design provides less stress and longer life for electronic components • No mechanical relays • Extensive electronic protections including PV short circuit protection • Epoxy encapsulated inductors and conformally coated printed circuit boards Very High Efficiency • Peak efficiency of 99% • Proprietary tracking algorithm minimizes power losses • Low self-consumption • Continuous operation at full power to 45°C without need to de-rate • Selected electronic devices with higher ratings to minimize losses from heating Extensive Networking and Communications Capabilities Enables system monitoring, data logging and adjustability. Uses open standard MODBUS™ protocol and Morningstar’s MS View software. • Meterbus: communications between compatible Morningstar products • Serial RS-232: connection to a personal computer • EIA-485: communications between multiple devices on a bus • Ethernet: fully web-enabled interface to a local network or internet; view from a web browser or send email/text messages. Metering and Data Logging • Optional TriStar meter and remote meter provides detailed operating data, alarms and faults • Three LED’s display system status • Up to 200 days of data logging via meters or communications ports Specification Electrical • Maximum Battery Current 45 amps • Nominal Maximum Solar Input 12 Volt 600 Watts / 24 Volt 1200 Watts / 48 Volt 2400 Watts • Peak Efficiency 99% • Nominal System Voltage 12, 24, 36 or 48 volts DC • Max. Solar Open Circuit Voltage 150 volts DC • Battery Operating Voltage Range 8-72 volts DC • Maximum Self-consumption 2.7 Watts • Transient Surge Protection 4500 Watts/port Electronic Protections • Solar: Overload, Short Circuit, High Voltage • Battery: High Voltage • High Temperature • Lightning and Transient Surges • Reverse Current at Night Battery Charging • Charging algorithm 4-stage • Charging stages Bulk, Absorption, Float, Equalize • Temperature Compensation Coefficient –5mV/°C/cell (25° ref) Range –30°C to +80°C Set points Absorption, Float, Equalize, HVD Note: Remote Temperature Sensor is included. Mechanical • Dimensions 29.1 x 13.0 x 14.2 cm / 11.4 x 5.1 x 5.6 inch • Weight 4.2 kg / 9.2 lbs. • Max. Wire Size 35 mm² / 2 AWG • Conduit knockouts M20; ½, 1, 1 ¼ inch • Enclosure Type 1 (indoor and vented) IP20 Environmental • Ambient Temperature –40°C to +45°C • Storage Temperature –55°C to +100°C • Humidity 100% non-condensing • Tropicalization Epoxy encapsulation / Conformal coating / Marine rated terminals Communication Ports • MeterBus Yes • RS-232 Yes • EIA-485 No • Ethernet No Options • TriStar Meter-2 (TS-M-2) • TriStar Remote Meter-2 (TS-RM-2) • Meter Hub (HUB-1) • Relay Driver (RD-1) Certifications • CE Compliant • ETL Listed (UL1741) • cETL (CSA C22.2 No. 107.1-01) • FCC Class B Part 15 Compliant • Complies with (NEC) U.S. National Electric Code • RoHS Compliant • Manufactured in a certified ISO 9001 facility Delivery time 3-5 days on all orders

Read more less

Morningstar Tristar 45 Solar Charge Controller, Hydro, Wind: Morningstar’s TriStar Controller is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions.The TriStar uses advanced technology and automated production to provide exciting new features at a competitive cost. The optional TriStar meter is the most sophisticated and informative controller meter on the market. The controller is UL listed and is designed for both solar home systems and professional applications. Features Large heat sink enables operating at full ratings to 60°C. More Power Ratings to 45A at 12v, 24v and 48VDC will handle solar arrays up to 2kW. RS-232 connects to a personal computer for custom settings, data logging and remote monitoring and control. DIP switch provides user with a choice of 7 different digital presets and custom settings via RS-232. Extensive electronic Protections. Fully protected against reverse polarity, short circuit, overcurrent, high temperature and overvoltage. Larger power terminals and conduit Better Battery charging Connecting battery sense wires optional remote temperature sensor will improve control accuracy. Constant voltage series PWM algorithm increases battery capacity and life. LED’s to indicate status, faults and alarms. Optional meter displays extensive system and controller information, automatic self-test and reset capabilities. Meter connection via RJ-11 phone jack DIP switch setting will change PWM to “On-Off” battery charging. Specification Electrical Specifications • Rated solar, load or diversion current: 45A • System Voltage 12-48V • Accuracy 12/24V: 0.1% ±50mV • Min. voltage to operate 9V • Max. solar voltage (Voc) 125V • Self-consumption: Controller <20mA / Meter 7.5mA Environmental Specifications • Operating ambient temperature: Controller –40°C to +60°C / Meter –40°C to +60°C • Storage temperature: –55°C to +85°C • Humidity: 100% (non-condensing) • Tropicalization: Conformal coating on both sides of all printed circuit boards Electronic Protections • Reverse polarity protection (any combination) • Short-circuit protection • Overcurrent protection • Lightning and transient surge protection using 4500W transient voltage suppressors • High temperature protection via automatic current reduction or complete shut down • Prevents reverse current from battery at night Mechanical Specifications • Dimensions: Height: 26.0cm/10.3 inch Width: 12.7cm/5.0 inch Depth: 7.1cm/2.8 inch • Weight: 1.6 kg/3.5 lb • Largest Wire: 35mm2 /2 AWG • Conduit Eccentric 2.5/3.2 cm / knockouts: (1.0/1.25 inch) • Enclosure: Type 1, indoor rated TriStar options: • TriStar Meter — 2 x 16 display mounts to controller and provides system and controller information, data logging, bar graphs and choice of 5 languages • TriStar Remote Meter — Includes 30 meters of cable for mounting meter away from the controller • Remote Temperature Sensor — Provides temperature compensated charging by measuring temperature at the battery (10 meter cable) Certifications • CE Compliant • UL Listed (UL 1741) • cUL (CSA-C22.2 No.107.1-95) • Complies with U.S. National Electric Code • Manufactured in a certified ISO 9001 facility Delivery time 3-5 days on all orders

Read more less

Introducing our advanced 45A MPPT solar charge controller/regulator for charging batteries, designed to provide optimal performance and energy efficiency for your solar power system. Equipped with advanced TrakStar technology, this high-quality charge controller delivers maximum power point tracking efficiency, ensuring optimal energy production from your solar panels. This charge controller is capable of handling 12V, 24V, 36V, and 48V battery systems, making it a versatile solution for a wide range of solar power applications. With its 45A capacity, this charge controller is designed to handle even the largest solar power systems, providing superior control and regulation of your solar power output. The TrakStar technology used in this charge controller ensures that it always delivers maximum efficiency and energy production from your solar panels. This technology continually monitors and adjusts the charge controller's settings to ensure that your solar panels are always operating at their highest possible efficiency, even in low-light or cloudy conditions. In addition, this charge controller is equipped with a variety of advanced features, including overcharge protection, over-discharge protection, and reverse polarity protection, ensuring the safety and reliability of your solar power system. Overall, our 45A MPPT solar charge controller/regulator with advanced TrakStar technology is a powerful and efficient solution for managing and regulating your solar power system. With its versatile compatibility, high capacity, and advanced features, this charge controller delivers superior performance and reliability, ensuring that your solar power system always operates at its maximum potential.

Read more less

Morningstar Tristar 60 MPPT Solar Charge Controller: Morningstar’s TriStar MPPT 60 solar charge controller with TrakStar Technology™ is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW. The controller provides the industry’s highest peak efficiency of 99% and significantly less power loss compared to other MPPT controllers.The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely fast sweeping of the entire I-V curve. This product is the first PV controller to include on-board Ethernet for a fully web-enabled interface and includes up to 200 days of data logging. Maximizes Energy Harvest Our TrakStar MPPT Technology features: • Better peak power point tracking than other MPPT controllers • Very fast sweeping of the entire I-V curve • Recognition of multiple power points during shading or mixed PV arrays • Excellent performance at sunrise and low solar insolation levels Extremely High Reliability • Robust thermal design and no cooling fans • Parallel circuit design provides less stress and longer life for electronic components • No mechanical relays • Extensive electronic protections including PV short circuit protection • Epoxy encapsulated inductors and conformally coated printed circuit boards Very High Efficiency • Peak efficiency of 99% • Proprietary tracking algorithm minimizes power losses • Low self-consumption • Continuous operation at full power to 45°C without need to de-rate • Selected electronic devices with higher ratings to minimize losses from heating Extensive Networking and Communications Capabilities Enables system monitoring, data logging and adjustability. Uses open standard MODBUS™ protocol and Morningstar’s MS View software. • Meterbus: communications between compatible Morningstar products • Serial RS-232: connection to a personal computer • EIA-485: communications between multiple devices on a bus • Ethernet: fully web-enabled interface to a local network or internet; view from a web browser or send email/text messages. Metering and Data Logging • Optional TriStar meter and remote meter provides detailed operating data, alarms and faults • Three LED’s display system status • Up to 200 days of data logging via meters or communications ports Specification Electrical • Maximum Battery Current 60 amps • Nominal Maximum Solar Input 12 Volt 800 Watts / 24 Volt 1600 Watts / 48 Volt 3200 Watts • Peak Efficiency 99% • Nominal System Voltage 12, 24, 36 or 48 volts DC • Max. Solar Open Circuit Voltage 150 volts DC • Battery Operating Voltage Range 8-72 volts DC • Maximum Self-consumption 2.7 Watts • Transient Surge Protection 4500 Watts/port Electronic Protections • Solar: Overload, Short Circuit, High Voltage • Battery: High Voltage • High Temperature • Lightning and Transient Surges • Reverse Current at Night Battery Charging • Charging algorithm 4-stage • Charging stages Bulk, Absorption, Float, Equalize • Temperature Compensation Coefficient –5mV/°C/cell (25° ref) Range –30°C to +80°C Set points Absorption, Float, Equalize, HVD Note: Remote Temperature Sensor is included. Mechanical • Dimensions 29.1 x 13.0 x 14.2 cm / 11.4 x 5.1 x 5.6 inch • Weight 4.2 kg / 9.2 lbs. • Max. Wire Size 35 mm² / 2 AWG • Conduit knockouts M20; ½, 1, 1 ¼ inch • Enclosure Type 1 (indoor and vented) IP20 Environmental • Ambient Temperature –40°C to +45°C • Storage Temperature –55°C to +100°C • Humidity 100% non-condensing • Tropicalization Epoxy encapsulation / Conformal coating / Marine rated terminals Communication Ports • MeterBus Yes • RS-232 Yes • EIA-485 Yes • Ethernet Yes Options • TriStar Meter-2 (TS-M-2) • TriStar Remote Meter-2 (TS-RM-2) • Meter Hub (HUB-1) • Relay Driver (RD-1) Certifications • CE Compliant • ETL Listed (UL1741) • cETL (CSA C22.2 No. 107.1-01) • FCC Class B Part 15 Compliant • Complies with (NEC) U.S. National Electric Code • RoHS Compliant • Manufactured in a certified ISO 9001 facility Delivery time 3-5 days on all orders

Read more less

Morningstar Tristar 60 Solar Charge Controller, Hydro, Wind: Morningstar’s TriStar 60 Controller is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions. Works with 12v, 24v and 48v battery systems and upto 60A. The TriStar uses advanced technology and automated production to provide exciting new features at a competitive cost. The optional TriStar meter is the most sophisticated and informative controller meter on the market. The controller is UL listed and is designed for both solar home systems and professional applications. Features Large heat sink enables operating at full ratings to 60°C. More Power Ratings to 60A at 12v, 24v and 48VDC will handle solar arrays up to 3kW. RS-232 connects to a personal computer for custom settings, data logging and remote monitoring and control. DIP switch provides user with a choice of 7 different digital presets and custom settings via RS-232. Extensive electronic Protections. Fully protected against reverse polarity, short circuit, overcurrent, high temperature and overvoltage. Larger power terminals and conduit Better Battery charging Connecting battery sense wires optional remote temperature sensor will improve control accuracy. Constant voltage series PWM algorithm increases battery capacity and life. LED’s to indicate status, faults and alarms. Optional meter displays extensive system and controller information, automatic self-test and reset capabilities. Meter connection via RJ-11 phone jack DIP switch setting will change PWM to “On-Off” battery charging. Specification Electrical Specifications • Rated solar, load or diversion current: 45A • System Voltage 12-48V • Accuracy 12/24V: 0.1% ±50mV • Min. voltage to operate 9V • Max. solar voltage (Voc) 125V • Self-consumption: Controller <20mA / Meter 7.5mA Environmental Specifications • Operating ambient temperature: Controller –40°C to +60°C / Meter –40°C to +60°C • Storage temperature: –55°C to +85°C • Humidity: 100% (non-condensing) • Tropicalization: Conformal coating on both sides of all printed circuit boards Electronic Protections • Reverse polarity protection (any combination) • Short-circuit protection • Overcurrent protection • Lightning and transient surge protection using 4500W transient voltage suppressors • High temperature protection via automatic current reduction or complete shut down • Prevents reverse current from battery at night Mechanical Specifications • Dimensions: Height: 26.0cm/10.3 inch Width: 12.7cm/5.0 inch Depth: 7.1cm/2.8 inch • Weight: 1.6 kg/3.5 lb • Largest Wire: 35mm2 /2 AWG • Conduit Eccentric 2.5/3.2 cm / knockouts: (1.0/1.25 inch) • Enclosure: Type 1, indoor rated TriStar options: • TriStar Meter — 2 x 16 display mounts to controller and provides system and controller information, data logging, bar graphs and choice of 5 languages • TriStar Remote Meter — Includes 30 meters of cable for mounting meter away from the controller • Remote Temperature Sensor — Provides temperature compensated charging by measuring temperature at the battery (10 meter cable) Certifications • CE Compliant • UL Listed (UL 1741) • cUL (CSA-C22.2 No.107.1-95) • Complies with U.S. National Electric Code • Manufactured in a certified ISO 9001 facility Delivery time 3-5 days on all orders

Read more less

Introducing our advanced 60A MPPT 600V charge controller/regulator with a DC transfer switch, the ultimate solution for large solar PV systems or retrofitting existing grid-tie systems. Equipped with advanced TrakStar technology, this high-quality charge controller delivers maximum power point tracking efficiency and high voltage capacity, ensuring optimal performance and energy production from your solar panels. With its 60A capacity, this charge controller is designed to handle even the largest solar PV systems, providing superior control and regulation of your solar power output. The DC transfer switch allows you to easily switch between solar power and grid power, ensuring that your system always has the power it needs, regardless of the weather or other conditions. The TrakStar technology used in this charge controller ensures that it always delivers maximum efficiency and energy production from your solar panels. This technology continually monitors and adjusts the charge controller's settings to ensure that your solar panels are always operating at their highest possible efficiency, even in low-light or cloudy conditions. The 600V capacity of this charge controller makes it an ideal solution for high-voltage solar PV systems, delivering superior performance and efficiency in even the most demanding conditions. Whether you are retrofitting an existing grid-tie system or building a new solar PV system, this charge controller is the perfect choice for maximizing your energy production and minimizing your energy costs. Overall, our 60A MPPT 600V charge controller/regulator with a DC transfer switch is a powerful and versatile solution for managing and regulating your solar power systems. With its advanced TrakStar technology, high voltage capacity, and efficient energy production capabilities, this charge controller delivers superior performance and reliability, ensuring that your solar PV system always operates at its maximum potential.

Read more less